Directorate Of Municipal Administration Tender

code04 - Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips PWD SR 2022-23 Page No15 Item No:5.40.1

code05 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A PWD SR 2022-23 Page No11 Item No:5.13.2

code06 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN PWD SR 2022-23 Page No13 Item No:5.17.9

code07 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A PWD SR 2022-23 Page No10 Item No:5.7.3

code08 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD SR 2022-23 Page No16 Item No:5.47

code09 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 63 A 4 pole PWD SR 2022-23 Page No13 Item No:5.20.4

code10 - Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 12" x 12" x 2" PWD SR 2022-23 Page No10 Item No:5.6.4

code11 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned. LED Streetlight 150 W PWD SR 2022-23 Page No36 Item No:11.8.6

code12 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. PWD SR 2022-23 Page No45 Item No:13.5

code13 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A DP PWD SR 2022-23 Page No13 Item No:5.17.4

code14 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 mm2 PWD SR 2022-23 Page No3 Item No:2.3.5

code15 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010 3C x 2.5 mm2 PWD SR 2022-23 Page No4 Item No:2.5.8

code16 - Decorative Median Light Poles: Fabricating, supplying and erection of 11 Mtrs Long hot dip Galvanized Conical pole with with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2052 for base plate with door opening arrangements, including suitable boards, bakelite sheet for MCBs as per IS specifications suitable boards, bakelite sheet for MCB as per IS specifications suitable to withstand the wind speed of 47 m/sec for 11 Mtrs pole in double / single section and single joint welded as per IS 9595/IS 10178AWS having stone bottom 200mm, top 70mm with 3mm thick.The poles should be painted ashetically using good quality auto coat paint. The side pole should be 3mtr height 165mm dia, 3mm thick having 1mtr perforation from 1.5mtr to 2.5 mtr height the poly carbonate pipe housed inside perforstion along with colour chnging LED visible from all sides. The foundation plate should be suitable alluminium head placed t the top including pc cover having 7 watt LED bulb inside. Suitable base plate 4Nos pf m-24 long J bolts along with template and the pole shall be hot dip galvanised dipping with not less than 65micron as per ASTM-A123 and 153 etc. The pole should be as shown in attached picture. Approved rate

code17 - Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter PWD SR 2022-23 Page No14 Item No:5.29

code18 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m common SR 2021-22 vol-1 Page No:6 Item No: 1.6.1 1x1000x0.60x0.60=360 38x1x1x1.20=45.60

code19 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregatescommon SR 2021-22 vol-1 Page No:15 Item No: 2.1.2 38x1x1x0.10=3.80

code20 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates common SR 2021-22 vol-1 Page No:15 Item No: 2.2.1.1 38.00x1x1x1.10=41.80

code21 - Foundation, Sub structure of Cross drainages common SR 2021-22 vol-1 Page No:115 Item No: 2

code22 - Supplying, Fitting and Placing TMT Fe 550 Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. SR 2021-22 vol-3 Page No:71 Item No: 9.3 34x1x1x1.10=37.40x100/1000

code23 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397516 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) BESCOM Part 3 11kv materials SR 2021-22 Pg No: 9 Item No:32.05

code24 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397525 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) BESCOM Part 3 11kv materials SR 2021-22 Pg No: 9 Item No:32.07

code25 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. BESCOM Part 4 11kv Labour SR 2021-22 Pg No: 8 Item No:29.02

code26 - Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) 2.5 to 25 Sqmm (Single/3.5/4 Core) BESCOM Part 4 11kv Labour SR 2021-22 Pg No: 9 Item No:30.05

code27 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff2.5 to 25 Sqmm BESCOM Part 4 11kv Labour SR 2021-22 Pg No: 9 Item No:31.05

code28 - HDPE/PLB Pipe 50/42 mm BESCOM Part 3 11kv materials SR 2021-22 Pg No: 26 Item No:73.04

code29 - Earthing materials pipe type for grounding (Single Electrode with accessories) Bescom part 5 cost data sheet 24 Item No:7

code30 - GI Wire 8 SWG Bescom part 5 cost data sheet 24 Item No:11

code31 - GI Pipe B - Class as per IS-1239 GI Pipe - 40 mm Dia BESCOM Part 3 11kv materials SR 2021-22 Pg No: 16 Item No:49.04