Directorate Of Municipal Administration Tender

cmcsiraele04 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specifications Foundations of Bridges

cmcsiraele05 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

cmcsiraele06 - Fabricating, supplying and erection of...ms long hot dip Galvanized Octagonal hot dip Pole with BSE N10025 grade S355JO steel plate for shaft,IS 2062 for base plate with door opening arrangements ,including suitable boards, Bakelite sheet and MCBsas per IS specifications suitable to with stand the wind speed of 47m/s for.......m Pole in single section and single joint welded as per IS9595/IS10178A WShaving dimensions bottom.....mm, top....mm with 3mm thick, suitable base plate and 4Nos of.....long J bolts along with template and the Pole shall be hot dip galvanized nsingle dipping with notless than 65micron as per ASTMA 123 and 153 etc.,(excluding foundation) as per drawing appended.7 m - Top 70 mm and Bottom 130 mm dia M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

cmcsiraele07 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for outdoor lumnaries and mounted n Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1500 mm Standard 40/50 mm dia

cmcsiraele08 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percentage , maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater Than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire Greater Than IK08. Power Factor Greater Than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 90.W System Power consumption. LED EfficiencyGreater Than 1301m/w, nominal CRI Greater Than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 istu 2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/ Lumileds/Osram make LED Source.90 watts.

cmcsiraele09 - Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work.3.5 X 10 Sqm

cmcsiraele10 - Fabricating supplying and mounting MS box made out. SWG suitable for floor/wall mounting ,fully weather proof with provision for better heat dissipation, provided withhing front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc. complete.16 SWG

cmcsiraele11 - Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers.

cmcsiraele12 - supplying & fixing miniature circuit breakes on existing MCB distribution boardsu sing necessary fixing materials and' C'Type curve ,indicator ON/OFF, energy cross 3with Short circuit breaking capacity of 10K and complete wiring as require d confirming to IEC60898.50-63 A TPN

cmcsiraele13 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fi xing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898.50-63 A SP

cmcsiraele14 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.65Amps

cmcsiraele15 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.