Directorate Of Municipal Administration Tender

code04 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures ( PWD SR 2023-24 Vol:1 P.NO.18 I.No: 2.11h)

code05 - Fabricating, supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5 Way connector of size 167 x 125 x 82 mm for 7.5M Pole/ 200 x 160 x 98 mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch, The Pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS2713-7-Erection of heavy duty Pole on ootpath/median. . -9m (5m Hb,165.1 mm dia 4.85 mm thick x 2m Hm, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 32 (2023-24 SR(VOL 6) of PWD Electrical SR, P.No:10, I.No:4.1.1)

code06 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K IP66 optical and electrical compartment impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part.Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source-LED Streetlight 90 W. - (2023-24 SR(VOL6)of PWD Electrical SR, P.No:4445, I.No:11.8.4 )

code07 - Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on C/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 40mm dia G.I.Pipe- Single bracket 2 m. Length (2023-24 SR(VOL 6) of PWD Electrical SR, P.No:55, I.No:13.4.1)

code08 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. (2023-24 SR(VOL 6) of PWD Electrical SR, P.No:55, I.No:13.5)

code09 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS 694:2010.- 4C X 4Sq.mm.(2023-24 SR(VOL 6) of PWD Electrical SR, P.No:5, I.No:2.5.16)

code10 - Supplying 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.- 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) (2023-24 SR(VOL 6) ESCOMSs SR P.No:443, I.No:32.08)

code11 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed .- In Hard Soil ( VOL 6, 2023-24 ESCOM SR, Item No.29.03, Page No-493)

code12 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff- HT Cable- 3x95 to 150 Sqmm (VOL 6, 2023-24 ESCOM SR, Item No.21.01, Page No-482)

code13 - Supplying of GI Pipe B - Class as per IS-1239. 40 mm. (CSR 2021-22 EESCOM-Vol6 in 2023-24 SR, Item No.48.04, Page No-468)

code14 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cabe-Up to 4C x 50 Sqmm ( VOL 6, ESCOMs SR 2023-24 , Item No.35.01, Page No-445)

code15 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.(2023-24 SR(VOL6)of PWD Electrical SR, P.No:18, I.No:5.35)

code16 - Fabricating supplying and mounting MS box made out 14 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (2023-24 SR(VOL6)of PWD Electrical SR, P.No:19, I.No:5.42.1)

code17 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.(2023-24 SR(VOL6)of PWD Electrical SR, P.No:20, I.No:5.48)

code18 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.- 65A (2023-24 SR(VOL6)of PWD Electrical SR, P.No:15, I.No:5.14.5)

code19 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.-63A (2023-24 SR(VOL6)of PWD Electrical SR, P.No:13, I.No:5.7.3 )

code20 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63Amps TPN (2023-24 SR(VOL6)of PWD Electrical SR, P.No:16, I.No:5.18.3 5 )

code21 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220 volts AC 50 Hz 12/24V DC. (2023-24 SR(VOL6)of PWD Electrical SR, P.No:18, I.No:5.38 )

code22 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments -(2023-24 SR(VOL6)of PWD Electrical SR, P.No:4, I.No:2.3.3 )

code23 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- (2023-24 SR(VOL6)of PWD Electrical SR, P.No:4, I.No:2.3.4 )

code24 - Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (2023-24 KUWS&DB SR, P.No 157, I.No.13.39)

code25 - Lowering,laying and fusion welding Jointing for HDPE Pipes Grade PE 80 / PE-100 conforming to IS 4984-2016, of specified dia. including hydrualic testing and commissioning etc.(Contractor will make his own arrangements for procuring water for testing) for:.63mm dia (BWSSB SR 2023-24, Vo5:1, P.No. 105 , I.No:9.15.1 )

code26 - Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site - Rock soil 5/6'' Bore (2023-24 SR(VOL6)of ESCOMs SR, P.No:486, I.No:28.02 )