Directorate Of Municipal Administration Tender

code04 - 2TB HDD Hard Disk Form Factor:- 3.5 Inches Hard Disk Description:- Mechanical Hard Disk. Model: 2TB HDD, Brand: Consisten

code05 - 8 Ch Smps Model: CP-CPSPD04-12D, Brand : Cp Plus.

code06 - 3 1 CCTV Cable (Standard Cable) 180mtr. Model: CP-ECC, Brand :Rodel

code07 - I/O Box

code08 - BNC

code09 - DC Pins

code10 - 2 U Rack

code11 - Monitor 18'5 Inch, Brand: Fingers

code12 - Electrical Material ( Pipes, Tapes, Clamps, Tags, PVC Clips, Grippers, Nails etc )

code13 - Camera Installation Charge

code14 - SICURO Drinking Water Cooler 60 litres / hour 120 litres GENERIC Description of Store Drinking Water Cooler, Storage type, Drinking water cooler conforming to IS:1475 (Part 1): 2001 latest, Whether Product ISI Marked No, If ISI Marked Yes BIS License Number must declare. If NO write Non ISI Marked Non ISI Marked. CAPACITY Cooling capacity (in litres / hour) 60, Storage capacity (in litres) 120. RATING Input voltage 230/240 Volt, 50 Hz, AC, Single Phase, Rate of maximum energy consumption (in Watts) 775, Power factor Must declare 0.85, Provision of connecting cable 1.5 m length of 3 core cable conforming to IS:9968 (Pt.1) or IS:694 provided. Material Material of drinking water cooler body Fully SS with = 0.5 mm thickness, Material of water storage tank sheet SS Grade 304 with 0.5 mm thickness, Water Tank cover lid and bottom Sheet material Epoxy Painted Galvanized iron sheet, Eco-Friendly refrigerant (Non CFC Refrigerant) used Yes, Additional requirement Not applicable.

code15 - 100 lph RO PLANT MS skid 300 GPD Membrane 3000 GPD high pressure pump MH housing 800 FR 3 amps smps 24 volt DC sv Corbon filter Push fittings pipes Uv lamp Corbon

code16 - Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm (0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. 42x50 mm PVC Extruded section

code17 - Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)

code18 - Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to achieve final desired compaction & setting of paver to its final level , including cost of materials, labour and usage charges of machinery complete as per specifications. (The cost of new paver/stones required shall be added separately)

code19 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia

code20 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code21 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per spcifications and as per directions of Engineer-in-charge.

code22 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

code23 - Door lock

code24 - C.P. Brass bibcock 15 mm

code25 - For Water Supply, Sewage and Electrical Maintanance and other maintainance as per the directions of the Engineer-in-charge

code26 - For Steam Gas Maintanance and Steam pipe line maintanace as per the directions of the Engineer-in-charge