Directorate Of Municipal Administration Tender

MMHL04 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest amendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, aying true to line and jointing of pipes and specials with electro fusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe all-round to a depth of not less than 15 cms. with soft gravel or selected earth available from the exaction, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Up to 110mm dia Coil shall be used.For :HDPE PE 100 PN 8.0 200mm dia HDPE, PE-100, PN-8 Pipe Common SR 2023-24 ,Vol-5, PNo.103 INo9.11.9

MMHL05 - Supplying, delivery to worksite, loading, unloading, stacking and fixing of resilient seated soft sealing Sluice Valves with body, bonnet of ductile iron of minimum grade GGG 40/50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/ IS 14846-2000/DIN 3202 F4/F5. The stem sealing should be with toroidal sealing rings (minimum 2 'O' rings), All the valves should be with electrostatic powder coating both inside and outside with pocket lessbody passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers, etc.complete with all lead& lifts. 200 mm dia PN-10 Common SR 2023-24 ,Vol-5, PNo.22 INo.2.23.5

MMHL06 - Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nickel overlay micro - finished/ Integral seat with body and disc in Ductile Iron in GGG 40/50 shaft of stainless steel and bearings of zinc free bronze and surface protection with epoxy liquid of GSK quality etc complete For PN 16.0 200 mm dia Common SR 2023-24, V-5 Page-32, It No: 2.48.5

MMHL07 - Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation.For PN 10.0 etc. complete 80 mm dia PN-10.0 Common SR 2023-24 ,Vol-5, PNo.44, INo.2.35.2

MMHL08 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Common SR 2023-24,Vol-1,P No-7, I No-1.10

MMHL09 - Automatic Online Hydraulically Operated Self Cleaning Multi grade Pressure Filter for the flow rate of ........................... LPH (............... M.L.D) with 16 hour pumping NOTE : For Detailed Specification of Automatic hydraulic self cleaning screen filter(400 Microns), FILTRATION & Filter Media For Pressure Filter, Anthracite, Carbon . Detailed Specification and Rates fot Separate components ( i.e.., Online Sensore, Filtration & Filder media) of 10000 LPH to 225000 LPH Refer Annexure-C For 85000 LPH (1.36 M.L.D) Common SR 2023-24 ,Vol-5, PNo.240, INo.20.8.7

MMHL10 - Disinfection System:-Supply, Erection & Commissioning of Disinfection System with 10liters container, 2 nos of 8LPH dosingPump, Mixer, associatedvalves & Tubing to dose Sodium Hypo Chlorite solution suitable for1.36 MLD

MMHL11 - Electro Mechanical Works Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS- 1180 (Part-1): 2014 100 kVA, Aluminium Wdg, Star 1 (4 Star) Common SR 2023-24 ,Vol-6, PNo.4/27 Ino.106/.12.05

MMHL12 - 3 Pole Structure Kit as per IS-1977 1 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS Common ESCOM SR 2023-24 ,Vol-6, PNo.12/81 INo.180/27.01

MMHL13 - ACSR Conductor as per IS-398 (Part - 2/1996) Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Common SR 2023-24 ,Vol-6, PNo.5/81 INo.7.02

MMHL14 - OUTGOING Feeder for 1 No. of main pumps:-1 Nos.160A TP MCCB with 60 HP Star delta starter with over load relay, single phase preventer and indicating lamps with ON and OFF push buttons. 1 No. Auto manual selector switch. Feeder for 1 No. of Jockey pump 1 No. 63A TP MCCB with 7.5 HP star delta starter with over load relay, single phase preventer and indicating lamps with ON and OFF push buttons. 1 No. Auto manual selector switch. Feeder for 1 No. DIESEL ENGINE MAIN PUMP a) 20Amps DP MCB 4 Nos. b) Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle or booster or off selector switch -2 Nos. c)1 set of indicating lamps for the following : 1. phase indication 2. battery charger on 3. over load relay 4. DC supply on 5. control switch on 6. Engine fails to start 7. Pump on 8. Low oil pressure 9. High water temperature 10. Auto manual selector switch d) 1 sets of push button stations for the following : 1.Engine Start 2.Engine Stop 3. Engine - hooter ACK 4. Engine - fault reset e) Selector switches (Engine control, mode selector)-1 No. f) Auxiliary relays or contactors or timer for sequence operating for starting and stopping of the engine - 1 set. g) Hooter for audio alarm (Industrial type) - 1 No. Supply,erection, testing and commissioning of Fire Fighting panel cubicle type made out of 14/16 Swg MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or sheet folded construction. The panel to be dust and vermin proof type and with powder coated paint after suitable seven tank pretreatment. The panel will have individual compartments for incoming and outgoing feeders made out of cold rolled sheet and doors fitted with Neoprene gaskets and fasteners. The switchboards are to be tested as per IS 8623-1977 specifications. Bus bars are to be of high conductivity Aluminum Alloy E91E IS 5082 specification. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height. Incoming feeder for 320A TPN MCCB with 320 Amps. TPN Al. Bus bars with color coded heat shrinkable PVC sleeves, RYB indicating lamps with individual MCB control. Suitable Multi Function meter with CT commmon SR 2023-24 ,Vol-6, PNo.98or105 INo.15.140

MMHL15 - Falcon Make 8 Inch(200mm)OD Size Bore well Pump,Discharge Out Let Size is 4 Inch ( 100mm) Discharge-91Cumtrs/Hr ( 91000 Liters / Hour ) @ 98 Mtrs Head Power of Motor 35hp@2980 RPM,Pump Model -FMC-0500-HD-7 Stage

MMHL16 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work PWD CSR 2023-24, Vol-I, P. No. 8, I. No. 1.14.1

MMHL17 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.1.2

MMHL18 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD CSR 2023-24, Vol-II, P. No. 9, I. No. 5.2)

MMHL19 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(1 cement : 6 coarse sand) PWD CSR 2023-24, Vol-II, P. No. 9, I. No. 5.4)

MMHL20 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregate Common SR 2023-24,Volume 1, Page No:15, Item No:2.3.1

MMHL21 - 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ( Common SR volume 2 , P.No 81, I.No 11.16.1)

MMHL22 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. .(Common SR volume 2 , P.No 21, I.No 7.1.1)

MMHL23 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD SR 2023-24, V2,Page No:76, SL No: 11.3

MMHL24 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints wi PWD SR 2023-24, V2,Page No:63, SL No: 9.25

MMHL25 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch box PWD Ele SR 2023-24, Page No: 5 item No: 2.2.1

MMHL26 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3m upto 6m from tapping point to out let via switch box PWD Ele SR 2023-24, Page No: 5 item No: 2.2.2

MMHL27 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 12" x 3" (300 x 300 x 76 mm) PWD Ele SR 2023-24, Page No: 2 item No: 1.6.1

MMHL28 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 4" x 4" x 3" ( 101 x 101 x 76 mm) PWD Ele SR 2023-24, Page No: 3 item No: 1.6.6

MMHL29 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A SP Switch PWD Ele SR 2023-24, Page No: 6 item No: 3.14.1

MMHL30 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Lamp Holder PWD Ele SR 2021-22, Page No: 6 item No: 3.14.1

MMHL31 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010 2C x 6 mm2 PWD Ele SR 2023-24, Page No: 7 item No: 2.5.21

MMHL32 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.16 A PWD Ele SR 2023-24, Page No: 10 item No: 5.7.1

MMHL33 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch PWD Ele SR 2023-24, Page No: 5 item No: 3.6.9

MMHL34 - Re-lettering with black Japan paint of approved brand and manufacture. to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (PWD SR 2023-24 Page No. 52, Item No. 8.69 Vol.2

MMHL35 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete 1 to 2 Way PWD Ele SR 2023-24 Page No: 2 item No: 1.6.6

MMHL36 - Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI 80. Power Input: 220-240Vat 50or60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2 - 9/10 W Electrical SR 2023-24 P NO 34 I NO 11.3.1

MMHL37 - Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy PWD Electrical SR 2023-24 P NO 14 I NO 5.33