Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.(Vol I Commom SR 2023-24 Item No.2.2.1 Page No. 67) Column

code05 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.(Vol I Commom SR 2023-24 Item No.2.2.1 Page No. 67) Arch Beam

code06 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including\ rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Vol II Building SR- 2023-24 Item No.8.4.1 Page No. 41)

code07 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc.,complete as per specification.(Vol II Building SR- 2023-24 Item No.10.19 Page No. 72)

code08 - Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer in-charge.(Vol II Building SR- 2023-24 Item No.8.21 Page No. 44)

code09 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..(Vol II Building SR- 2023-24 Item No.8.25 Page No. 45)

code10 - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade (Vol III Building SR- 2023-24 Item No.8.3 Page No. 53)

code11 - Providing and fixing seating bench 1 no base slab, 1 no backrest, 2 no legs, made up of granite stone with nice finish chamfered edge and fillet corner finishes is conveyed to work site it is inclusive of all lead and lift, labour, transportation loading unloading charges, over heads, hire charges of macinery all and placing in position etc., complete work shall be carried out as per the detailed specification, Architect drawing and direction of the engineer in charge of the work. The work includes all the other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the equipment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work as per the direction of Engineer-in-charge