Directorate Of Municipal Administration Tender

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 - 6 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 6-32Amps SP ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 50-63Amps TPN ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. - 100Amps 4x30x6mm Aluminium Strips ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

LED Street light : .Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. - LED Streetlight 150 Watts ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 - 4 core 16 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 - 3.5 core 25 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 - 3C X 2.5Sq. mm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. - 60 to 70Amps ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing HRC fuse units base on existing switch / panel board. - 32 to 63 Amps ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing HRC fuse link on existing switch fuse base with watt loss as per IS-13703. - Up to 63Amps ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. - 8 SWG GI Wire ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7) - In soil (ordinary) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7) - Asphalt cutting ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required. In existing trench/duct. On wall/Structure - 6 sqmm to 16 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required. In existing trench/duct. On wall/Structure - 25 sqmm to 75 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV - 40mm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) - 19/20mm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. - 25 sqmm Long Barrel ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. - 16 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. - 2.5 sqmm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. - 40mm dia 2.5mm thick ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and fixing of Spiral Earth Electrodes as per standard technical specification as per ESCOM. ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. - 25x6mm GI strip ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5 (2.4 2018-19 PWD) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

KSRB 4-1.2 : Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 (P.No.13 I No.4.2 2018-19) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 (P No.14 I No.4.11 2018-19) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500 (P No.18 I No. 4.46.2 2018-19) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 (P No.18 I.No.4.32 PWD 2018-19) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Decorative median light poles: Fabricating, supplying and erection of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for 11 Mtrs pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 200mm, top 70 mm with 3mm thick, 2nos poles the pole shoould be painted ashteically using good quality pu autocoat paint . The centre pole should be 3 Mtrs height, 165mm dia, 3mm thick having 1 mtr perporation from 1.5 mtr to 2.50mtr height the polycarbonate pipe housed inside perforation along with color changing LED visible from all side foundation plate should be suitable to fix the 2 nos 11 mtr bent at side of the pole suitable aluminium head placed at the top including pole cover having 7 watt LED bulb inside. suitable base plate and 6 Nos of.24.long J bolts along with template and necessary 4nos of m-24x100 mm long bolts and the pole should be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc., The Pole should be as shown in attached picture (The rate approved a per Deputy Commissioner (Dev) City corporation Belagavi ,order copy is enclosed ) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work

Removing of existing 9mtr dividerTubular poles and kerbs (Hescom labour SR) (Labour Item No for digging-1.1.2+errection-2.4)*81.136%=(1294+682)*81.136%=1600 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work