Directorate Of Municipal Administration Tender

code04 - Providing Centering to Concrete works. Qty Footing-3%[Pno-111,Ino-4,2023-24 Common SR,V-I]

code05 - Providing Centering to Concrete works Pinth Beam -50%[Pno-111,Ino-4,2023-24 Common SR,V-I]

code06 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)[Volumme-I,PNO-9, INO-5.1.1 Of PWD SR For 2023-2024]

code07 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)[Volumme-I,PNO-9, INO-5.4 Of PWD SR For 2023-2024]

code08 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:2:4 (M10) Using 20 mm nominal size graded crushed coarse aggregates[Volumme-I,PNO-15, INO-2.1.4 Of PWD SR For 2023-2024]

code09 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel \ reinforcement & formwork to be paid separatelyM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates[Volumme-I,PNO-16, INO-2.3.2 Of PWD SR For 2023-2024]

code10 - Providing Centering to Concrete works[Pno-111,Ino-4,2023-24 Common SR,V-I]

code11 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.[Volumme-II,PNO-13 INO-6.4 Of PWD SR For 2023-2024]

code12 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.(The laps and wastages shall not be measured separately)[Vol-II,PNO-91, INO-2.11 B, Of PWD SR For 2023-2024]

code13 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding[Volumme-II,PNO-85, INO-11.34B Of PWD SR For 2023-2024]

code14 - Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge[Volumme-II,PNO-75, INO-11.4.Of PWD SR For 2023-2024]

code15 - French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge[Volumme-II,PNO-49, INO-8.46.Of PWD SR For 2023-2024]

code16 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.s[Volumme-II,PNO-105, INO-12.51 Of PWD SR For 2023-2024]

code17 - Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.[Volumme-II,PNO-42, INO-8.7Of PWD SR For 2023-2024]

code18 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.[Volumme-II,PNO-47, INO-8.33.3 Of PWD SR For 2023-2024]

code19 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.[Vol-II,PNO-45, INO-8.29 Of PWD SR For 2023-2024]

code20 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent[Volumme-II,PNO-63, INO-9.23.Of PWD SR For 2023-2024]

code21 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge[Volumme-II,PNO-85, INO-11.28 Of PWD SR For 2023-2024]

code22 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge[Volumme-II,PNO-81, INO-11.16.2 Of PWD SR For 2023-2024]

code23 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.[Volumme-II,PNO-26, INO-7.38Of PWD SR For 2023-2024]

code24 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work-Exposed on wall. 15 mm Nomonal dia Pipes[Vol-II,PNO-122, INO-13.31.1 Of PWD SR For 2023-2024]

code25 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work-Exposed on wall 20 mm Nomonal dia Pipes[Vol-II,PNO-122, INO-13.31.1 Of PWD SR For 2023-2024]

code26 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 15 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Volumme-II,PNO-123, INO-13.34 Of PWD SR For 2023-2024]

code27 - Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.Specification No. do - 20 mm dia nominal[PNO-117,INO-13.5.2,Of 2023-2024PWD SR Of SR,V-5]

code28 - Providing and fixing gun metal non- return valve of approved quality (screwed end) :[PNO-117,INO-13.5.2,Of 2023-2024PWD SR Of SR,V-5]

code29 - Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main ::[PNO-118,INO-13.7.2,Of 2023-2024PWD SR Of SR,V-5]

code30 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge.[PNO-118,INO-13.7.2,Of 2023-2024PWD SR Of SR,V-II]

code31 - Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size -1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).Welcome@2021

code32 - Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Material-Stainless steel 304-L Grade with Aluminium Stucco cladding made of High quality PUF insulation to minimizes heat loss and hold water Temperature upto 72 Hrs...with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. Fitted with Sacrificial Anode[Volumme-IV-PART-I PNO-35,INO-7.4.2, Of2023-2024 PWD SR]

code33 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint75 x 75 x 6 mm [BESCOM-Part-I,PNO-20,INO-5.41.3 for -2023-2024]

code34 - Supply and erection of 9Mtr RCC/PSCC Pole DP Structure including earth work etc,, complete as per the standard technical specification of Bescom. per Bescom Sanction Estimate)

code35 - Labour Charges For Erection9Mtr RCC/PSCC Pole DP Structure (As per Bescom Sanction Estimate)

code36 - And washers for PSCC Poles. (As per Bescom Sanction Estimate)

code37 - Labour Charges For Fixing Horizontal Cross arm with Clamps HTST Supports bolts, nuts and washers for PSCC Poles. (As per Bescom Sanction Estimate)

code38 - GUY Set Complete with No 15 Strain Insulator & Concreeting Materials. (As per Bescom Sanction Estimate)

code39 - Labour Charges For Fixing GUY Set Complete with No 15 Strain Insulator & Concreeting Materials.(As per Bescom Sanction Estimate)

code40 - 11 KV GOS 200A S/B With H Frame (As per Bescom Sanction Estimate)

code41 - Labour Charges For Fixing11 KV GOS 200A S/B With H Frame(As per Bescom Sanction Estimate)

code42 - HG Fuse Unit (As per Bescom Sanction Estimate)

code43 - Labour Charges For Fixing HG Fuse Unit (As per Bescom Sanction Estimate)

code44 - Rabbit ACSR Conductor with 1.5% sag (As per Bescom Sanction Estimate)

code45 - Labour Charges For Stringing Rabbit ACSR Conductor (As per Bescom Sanction Estimate)

code46 - Conductor Acessories 3%(As per Bescom Sanction Estimate)

code47 - Star Rated Distribution Transformer of Capacity 100 KVA,11 KV,Class 50Hz with Oil (As per Bescom Sanction Estimate)

code48 - Labour Charges For Erection ofStar Rated Distribution Transformer of Capacity 100 KVA, 11KV, Class (As per Bescom Sanction Estimate)

code49 - 11 KV 3Core XLPE UG Cable 95 Sq mm (As per Bescom Sanction Estimate)

code50 - Labour Charges for 11 KV 3Core XLPE UG Cable 95 Sq mm (As per Bescom Sanction Estimate)

code51 - HS Type Cable Termination Kit For Out-Door 95/120 Sq mm Cable (As per Bescom Sanction Estimate)

code52 - Labour Charges For Jinting HS Type Cable Termination Kit For 4 Out-Door 95/120 Sq mm Cable (As per Bescom Sanction Estimate

code53 - HS Type Cable Termination Kit For In-Door 95/120 Sq mm Cable (As per Bescom Sanction Estimate)

code54 - Labour Charges for HS Type Cable TerminationKit for In-door 95/120 Sq mm Cable(As per Bescom Sanction Estimate)

code55 - RCC Hume Pipe 2000 mm long 150 mm Dia (As per Bescom Sanction Estimate)

code56 - Labour Charges For LayingRCC Hume Pipe 2000 mm long 150 mm Dia per Bescom Sanction Estimate)

code57 - Collar For LayingRCC Hume Pipe 2000 mm long 150 mm Dia per Bescom Sanction Estimate)

code58 - GI Pipe 150/200 mm dia For Cable Raising etc, per Bescom Sanction Estimate)

code59 - Labour Charges For Laying GI Pipe 150/200 mm dia For Cable Raising etc, per Bescom Sanction Estimate)

code60 - LT UG Cable 95 Sq mm (As per Bescom Sanction Estimate)

code61 - Labour Charges For Laying LT UG Cable 95 Sq mm (As per Bescom Sanction Estimate)

code62 - Labour Charges For Cable trench excavation 100x0.6x1=60 in ordinary soil As per Bescom Sanction Estimate)

code63 - Labour Charges For Re-Filling and Consalidation. (As per Bescom Sanction Estimate)

code64 - Construction of Platform With Size Stone, Cement Concreete 1 for Errection of HT Metering Cubical (Including Labour) As per Bescom Sanction Estimate)

code65 - Pipe Type Earthing (As per Bescom Sanction Estimate)

code66 - Labour Charges For Pipe Type Earthing (As per Bescom 3 Sanction Estimate)

code67 - Providing Chain link Fencing 50mm Size of 8 gauage properly streched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at the top and bottom as required including cost of 4 all materials, labour, lead and lifts, cutting, bending, wherever necessary wastage and lapping etc, complete as per the direction of the engineer including for work including two coats of approved quality paint over one coat of primer paint (both materials Labour) (As per Bescom Sanction Estimate)

code68 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)

code69 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over theexisting wood/panel board using necessary screws. bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 (Icu=100% Ics) In 4P MCCB, all Poles should have protection for Short- Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in theMCCB MCCB shall be provided with double insulation(insulationbetween front cover and internal power circuits to avoid any accidentalcontact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism P. No 16817 / No5.15

code70 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3 with Shortcircuit breakingcapacity of 10K and complete wiring as requiredconfirming to IEC60898. Electriacal Works to New TMC. 6-32 A DP P.No 171 No5.18,5.18.4 P.No 17 I No5.18

code71 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3 with Shortcircuit breakingcapacity of 10K and complete wiring as requiredconfirming to IEC60898.

code72 - Supplying, fixing and wiring earth leakage relay with core balancedcurrent transformer suitable for single phase 50 Hz AC with latestmicrocontroller based, digital readout of percentage leakage current programmable delay/auto/ manualreset facility suitable to mount onDIN raill flush mounting on panel board P.No 18 I No5.21.

code73 - Supplying, fixing and wiring 3 Phase Digital Ammeter/ Voltmeter P.No 19 1 No5.29.

code74 - Supplying of multi function digital meter with three line back lightLCD type display for voltage, Current, frequency, Power powerfactor, KVA, KWH, KVAR suitable for 3 phase, 4wire LT networkwith IP 54 degree of protection andcompletely wired as required withcommunication Port and Class 0.5s

code75 - Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden 7 class 1 Current Transformer P.No 19 I No5.36.

code76 - Supplying and fixing of LED type panel board indicating lamp 8 with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C P.No 191 No5.38.

code77 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted. 100 A 4 x 30 x 6 mm Aluminium Strips P.No 20 I No5.40.1

code78 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted 250 A 4 x 30 x 10 mm Aluminium Strips P.No 201 No5.40.2

code79 - Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fullyweatherproofwithprovision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, withsuitable size clamps with necessary cable entry pipe with glandandbox 10 should be finished with7tankstreatmentwithpowdercoatedpaint and finally finished with approved colour etc., complete. P.No 20 I No5.42

code80 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meterboardusing 40 mm dia2.90 mm thick Gl pipe 2.5m longburied in a pit. The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., istobeestablishedthrough GlwireofsizeasperlSispe.3 3. of IS 732 using 12 mmdiabolts, nuts, washersandchecknuts etc., the pipe shall have 16 through holes of 12 mm dia P.No 54 I No 12.56

code81 - GI/Copper strips for grounding connections, using necessary 12 fixingmaterials as required. P.No 54 I No 12.58

code82 - 13 LT UG Cable 95 Sq mm (As per Bescom Sanction Estimate)

code83 - Labour Charges For Laying LT UG Cable 95 Sq mm (As per Bescom Sanction Estimate)

code84 - Labour Charges For Cable trench excavation 45x0.6x1=27 in ordinary soil As per Bescom Sanction Estimate)

code85 - Labour Charges For Re-Filling and Consalidation. (As per Bescom Sanction Estimate)

code86 - Supplying of box fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excluding Tube[PNO-50,INO-12.26.2 Of CommonSR-V-6]

code87 - Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greter than 80. Power Input: 220-240V @50/60Hz & Power factor greter than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition[PNO-44,INO-11.5.3 Of CommonSR-V-6]

code88 - Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet,Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans)[PNO-30,INO-6.4.1 Of CommonSR-V-6]

code89 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.[PNO-30,INO-6.2.1 Of CommonSR-V-6]

code90 - Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.[PNO-30,INO-6.5.2 Of CommonSR-V-6]

code91 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.[PNO-57,INO-13.11 Of CommonSR-V-6]

code92 - Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame[PNO-57,INO-13.13 Of CommonSR-V-6]

code93 - Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation Alternator: Alternator is suitable for operation at 1500 RPM, 415 V, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming to IS/IEC 60034-1. The Alternator is brush less type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have 1.0% Voltage regulation (max) in static conditions- IP: 23 protections with insulation class F&H Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lA for 'Load On' and 'Set Running', Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,-Auto start mode accepts a ground signal from remote devices to automatically start the DG set The remote start will also wake up the control system from sleep mode.Engine Starting -The control system supports automatic engine starting, Primary and back up start disconnects are achieved by battery charging alternator feedback or main alternator output frequency. Controller provide configurable time delay of 0-300 sees to start after remote start signal and time delay of 0- 600secs prior to shut down after stop signal. Sleep mode increase battery life. Configurable current settings from low to minimize current draw when genset is not working. Engine Protective functions include, Configurable alarm output, Emergency stop: Annunciated whenever an emergency stop signal is received by the control. Low lube oil pressure warning and Shutdown, High engine water temp warning / Shutdown, Low coolant temp warning

code94 - Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternator with thermal O/L relay,. A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.[Volumme-VI,PART-I,PNO42, INO-10.2.1Of PWD SR For 2023-2024]

code95 - EARTHING MATERIALS Pipe type for Grounding Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified[Volumme-VI,PNO-23, INO-50.04 Of PWD SR For 2023-2024] No 4 4317 17268

code96 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg[Volumme-VI,PNO-22, INO-51.01 Of PWD SR For 2023-2024] Mtr 20 202 4040

code97 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100A[Volumme-VI,PNO-16, INO-5.13.4 Of PWD SR For 2023-2024] Each 1 6426 6426

code98 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.[Volumme-VI,PNO-16, INO-5.14.6 Of PWD SR For 2023-2024] Each 1 9915 9915

code99 - Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. 100-250A.[Volumme-VI,PNO-57, INO-13.18.3 Of PWD SR For 2023-2024] Each 1 387 387

code100 - DWC (Doub. Wall Corrug) pipe SN 8, 170mm dia sl no 630

code101 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975[ BESCOM SR-PART-III MATETIARLS-11 KV,INO-32.06-2023-2024 SR]

code102 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975[ BESCOM SR-PART-III MATETIARLS-11 KV,INO-32.06-2023-2024 SR] 50 Sqmm, 4 Core, (17 GI Strips - 4 x 0.8 mm

code103 - Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/ three phase suitable capacity MCCB/MCB's as outgoings\confirming to IS8828. 12 way item no: 5.16.3 page no 27

code104 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40Amps TPN item no: 5.17.8 page no 27

code105 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps DP item no: 5.17.4

code106 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 page no page no 7 item no : 2.5.16 4C X 4Sq.mm

code107 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5sqmm to 25sqmm

code108 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35sqmm to 95sqmm

code109 - Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI greter than 70%. efficacy greter than 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition

code110 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. Page no 28 item no 5.20.3 32-40 Amps 4 pole

code11 - Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG

code112 - Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 10mm dia main steel bars and 8mm dia stirpes as shown in drawing. The board shall be provided with 12mm thick cement plaster in cement mortar 1:4 on both the sides. The poles shall be embedded in the ground for a depth of 0.5 m with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineer in charge of the work. The cost includes excavation, cost of all materials, cost of steel, painting, centering, transportation charges & fixing charges. COMMN SR-VOL-3 (SL.NO.8.55-C4 PG NO-79)