Directorate Of Municipal Administration Tender

code5.4 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).( Vol Il, P-6, I.No.5.4 ( S.R 2024-25)

code2.1.4 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) (VOL-1/I.N-2.1)Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregatesVOL-1/I.N-2.1.4) SR -2024-25

code9.2 - Providing and laying 52 mm thick cement concrete flooring with concretehardener topping, under layer 40 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominalsize) and top layer 12 mm thick cement hardener consisting of mix 1:2(1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size)by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge.(VOL-2/I.N-9.2)

code6.8.2 - Providing and laying 80mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions upto 10MSA& for Residential Streets of approved shape and colour, laid inrequired pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) ( Vol lll,, I.No.6.8.2 S.R 2023-24)

code6.32 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(VOL-2/I.N-6.32) SR -2024-25

code6.32 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(VOL-2/I.N-6.32) SR -2024-25

code2.4.2 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevantIS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) (VOL-1/I.N-2.4)Appendix I Additionalities for Formwork, Centering & Scaffolding, Foundation, Sub structure of Cross drainages for centering 5% on the Percentage on finished rate of concrete per m3(VOL-1/PG.NO-115/SL.NO-2)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (VOL-1/I.N-2.4.2)

code2.11c - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / softannealed steel wire and other ancilary operations complete as per drawing andtechnical specification.c.Sub structure of Bridges(VOL-1/I.N-2.11(C))

code6.32 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(VOL-2/I.N-6.32) SR -2023-24

code11.34b - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR 2024-25, Vol.02, Item no.11.34B)

code11.5.2 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge..(VOL-2/I.N-11.5.2) SR -2023-24

code8.29 - Finishing walls with textured exterior paint of required shade :New work(Two coats applied @ 3.28 ltr/10 m²) over and including priming coat ofexterior primer applied @ 2.20kg/10 m² to give an even shade afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge.(VOL-2/I.N-8.29)

code8.40 - Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge(VOL-2/I.N-8.40)

code15.1 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofingmembrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofingmembrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification(VOL-2/I.N-15.1)

codeapprovedrate - providing and applying one coat apex paint for background & second coat for murals paint of approved brand on wall surface including primer after thorough brooming the surface to remove all dirt dust mortar drops and other foreign matters including preparing surface using sand paper cost of all materials ,labour complete as per specification(Approved Rate)

code14.1.1 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:14.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm withintegral type foot rest (VOL-2/I.N-14.1.1)

code14.2.1 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (VOL-2/I.N-14.2.1)

code13.50.2 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work20 mm nominal dia Pipes (VOL-2/I.N-13.50.2)

code13.34 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (VOL-2/I.N-13.34)

code1.5 - Mono block single phase pump 2/1.5(Sl no 4 pg no XLV) (2018-19 pwd SR)

code3.1 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (VOL-3/I.N-3.1) 2023-24 SR