Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 16,250Document Cost
Refer DocumentsTender Fee
₹ 500
Summary
Repair & Renovation Of Harlayya Samudaya Bhavan At Mangalpeth In Bidar City (for St Contractors)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/OW/WORK_INDENT33325Tender No
DMA/2024-25/OW/WORK_INDENT33325Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to
brick/stone masonry including rounding off corners wherever required
smooth rendering, providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge
193.7
371
71998.29
... More
code05 - Providing and laying vitrified floor tiles with thickness 9-10 mm in
different sizes with water absorption less than 0.08% and conforming to
IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
168
1202
201978
... More
code06 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick
confirming to IS 2509 with suitable size bends, metal/PVC Junction
boxes, adhesive paste etc., and running before concreting the slab. The
conduit should be tied to the reinforcement rods by using binding
wires and unused ways of junction boxes and pipe ends should be
covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 25 mm dia 2 mm thick
100
81
8190
... More
code07 - Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick
with suitable size bends, metal junction boxes adhesive paste etc., by
groove cutting in the wall and fixing by bracing U or J hooks and
cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick
100
82
8295
... More
code08 - Supplying and flush mounting powder coated / galvanized metal box
suitable for mounting modular switch plates. The box should be firmly
flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4.2
2
166
333.9
... More
code09 - Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 3 Module
4
169
676.2
... More
code10 - Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS-
694:2010 2.5 mm2
150
44
6615
... More
code11 - Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch
15
107
1606.5
... More
code12 - Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A SP
2
435
871.5
... More
code13 - Supplying and fixing regular MCB distribution boards on wall/ood
board / flush mounting using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's single phase/3
phase/single door with powder coated painting Made out of 14 SWG
MS enclosure. 6 Way SP & N
2
1245
2490.6
... More
code14 - Supplying and fixing regular MCCB distribution Panel confirming to
IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum
IP43 protection provided with Polyurethane (PUR) gasket, with
suitable earthing system, on wall/wood board/flush mounting using
required cl A , bolts, nuts, etc., with provision for fixing of suitable
type capacity MCCB's as an incomer for 3 phase Double door with
necessary bus bar completely wired to use on 440V 3phase 4 wire
powder coated painting etc., complete with a provision for fixing of
single/three phase suitable capacity MCB's as outgoings confirming to
IS/IEC 60898 - 2. 4 Way
2
10845
21690.9
... More
code15 - Supply and fixing of 3pole power contactor with NO/NC contacts on
existing wood/panel board using necessary bolts, nuts, washers
and wiring etc., complete with AC-3 Rating and as per IS-13947 100 A
2
9476
18952.5
... More
code16 - Supplying of multi function digital meter with three line back light
LCD type display for voltage, Current, frequency, Power, power
factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network
with IP 54 degree of protection and completely wired as required with
communication Port and Class 0.5s accuracy
1
9780
9780.75
... More
code17 - Supply and Installation / Fixing / Provision of Outdoor type thrermoplastic modular panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust
1
7210
7210.35
... More
code18 - Supplying and fixing angle iron frame work fabricated out of M.S.
angle iron.. and M.S. Flat......with bolts, washers etc., and painted
with 2 coats of red oxide and then two coats of approved paint 50 x 50 x 6 mm
2
414
829.5
... More
code19 - Digging of trench of 0.60m deep x 0.50mtrs wide refilling the trench to the required ground level and consolidating etc., complete In hard soil
100
346
34650
... More
code20 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
0.05
148934
7446.705
... More
code21 - Labour charges for laying of 1.1KV class UG cable when
wall/on pole as required exising trench/duct 6 to 16 Sqmm Mtr
50
12
623.5
... More
code22 - Supplying capacitor type ceiling fan complete with down rod blades,
shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase
AC supply conforming to ISS-374- 1979 and with double ball bearing
system. 48" Sweep (1200 mm) Regular model
10
3133
31332
... More
code23 - Supplying and fixing of slim patty fitting, made out of CRCA Sheet
metal body with locking type holder completely wired. Excluding
Ballast & Fluorescent Tube 1 x 4' Tube light fitting.
15
282
4236.75
... More
code24 - Providing Mathi/Nandi wood frames of doors, windows, clerestory
windows, ventilators and other frames, wrought, framed or assembled
including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications
0.08
130412
10432.968
... More
code25 - Providing and fixing in position fully panelled Teak wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ).
4.2
7439
31244.85
... More
code26 - Providing and fixing in position fully glazed shutters for ventilators side
hung or central pivoted with Mathi/Nandi wood stiles and rails of 30mm
thick 50mm wide and central divider of 30mm. wide, 3mm thick reeded
glass fixed with wooden beading of size 10mm wide flushed to the thickness of the frame including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures)
7.2
6440
46373.04
... More
code27 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge
32.8
6440
211254.96
... More
code28 - Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
193.7
27
5288.01
... More
code29 - Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly
brooming the surface to remove all dirt, dust, mortar drops and foreign
matter including preparing the surface even and sand paper smooth, cost
of materials, labour complete as per specifications and as per directions
of Engineer-in-charge
193.7
143
27863.745
... More
code30 - Finishing walls with water proofing cement paint of required shade :New
work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge
193.7
93
18101.265
... More
code31 - Painting Steel work with Deluxe Multi Surface Paint to give an even
shade. Two coat applied @ 0.90L/10 m² over an under coat of primer
applied @ 0.80 L/10 m² of approved brand and manufacture including
preparing the surface after thorougly cleaning oil, grease, dirt and foreign
matter, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge
37.81
145
5518.3695
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%