Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.

code05 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification

code06 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

code07 - Fabricating, supplying and erection of ... ms long hot dipGalvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements,including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top ... mm with 3 mm thick, suitable base plate and 4Nos of.........long J boltsalong with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153etc.,(excluding foundation) as per drawing appended. 9 m - Top 75 mm and Bottom 165 mm dia

code08 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare cleardiffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees CCT 5500K IP66 optical and electrical compartment impact resistance of complete luminaire IK08 Power Factor 0.9 with mains,Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to270V 50 60Hz application. Compliance to IS 10322 IEC 60598 LM 79 LM 80 Adherence with Ro HS. UL approved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption LED Efficiency1301mW nominal CRI 75. Luminaire manufacturer should have in house facility accredited by NABL CPRI any Government certified agency Design Development facility certified by ISO 9001 2008 Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree Nichia Lumileds Osram make LED Source. LED Streetlight 200 W

code09 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:20102.5.162C x 1.5 mm2

code10 - Fixing of ...... Amps TPST / change over switch / Contractor along with neutral link with screws, bolts,nuts,and wiring using required capacity wires and circuit labeling, light fittings over existing pole/well galying imcluding clamping and nut bolts with wiring complete works. 15A to 63A TPDT/COS