Directorate Of Municipal Administration Tender

item 4 - Digging of Pit for providing GI Pipe type Earthing in hard laterite soil

item 5 - Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified

item 6 - Supplying of onload change overs witches4poles,AC-3ADuty,415V ,50Hz, AC Supply. With all accessories.(SM Enclosure Sheet Metal Execution)

item 7 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase&Neutral)&1x1.0sqmm(Earthwire) FRLS multistrand PVC insulated copperwire (confirmingtoIS-694:and latest amendments) with 6Amps flush type SPcontrol switch shall be fixed on the existing plastic sheet/ gangbox ,the othere ndofthe wire sshall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.

item 8 - Providing and laying of GI pipes - 32 mm Dia for covering the UG cable

item 9 - Supplying heavy guage PVC pipe 25 mm Dia 2 mm thick confirming to IS-2509 with suitable size bends, junction box, adhesive paste etc and fixing using inverted wood plug in case RCC ceiling & RCC Wall stone Structure are rawal plugs in case of brick walls and cement plastering damaged portion using heavy gaauge saddles at an intervel of 700mm using NF Screws (2/1)

item 10 - Supplying and fixing 32A security and energy saving DP switch with keyt ag suitable to operate on230V ,50Hz Acs upply & completely wired on existing box.

item 11 - Supplying and fixing of Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

item 12 - Supply of LED Street light luminaire with pressure die cast auminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70degrees. CCT -5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire-IK08.PowerFactor-0.9 with mains ,Surge Protection-Min 5KV along with Over voltage /Overload, shortcircuit /miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS10322/IEC60598, LM79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.40.W System Power consumption. LED Efficiency 1301m/w,nominalCRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark/ name shall be Engraved/Embossing on the diecast housing/Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufactrer Cree-Nichia-Lumileds-Osram make LED Source. LED Streetlight 40W

item 12.1 - Supply of LED Street light luminaire with pressure die cast auminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70degrees. CCT -5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire-IK08.PowerFactor-0.9 with mains ,Surge Protection-Min 5KV along with Over voltage /Overload, shortcircuit /miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS10322/IEC60598, LM79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.40.W System Power consumption. LED Efficiency 1301m/w,nominalCRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark/ name shall be Engraved/Embossing on the diecast housing/Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufactrer Cree-Nichia-Lumileds-Osram make LED Source. LED Streetlight 70W

item 13 - RCC Pole - 9 Mtr Long, 145 Kg WL(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

item 14 - LT Cross Arm for vertical Configuration - GI