Directorate Of Municipal Administration Tender

004 - Erection of 3ph 11kV/433V, 25kVA 5 star rated DTC using 9mtr RCC pole as per data sheet no.24 with material cost, labour cost as per HESCOM (DTC No- 27)

005 - DTC Modem with material cost, labour cost as per HESCOM (DTC No- 25 & 27 )

006 - 4 Pin X Arms, clamps with nuts and bolts for etc. with material cost, labour cost as per HESCOM (DTC No- 25,109,27 & 27)

007 - 2 Pin X Arms, clamps with nuts and bolts for etc. with material cost, labour cost as per HESCOM (DTC No- 25)

008 - 1.1 kV Pin Insulator with GI Pin with material cost, labour cost as per HESCOM (DTC No- 25,109,27 & 27)

009 - 8kV Strain Insulator with material cost, labour cost as per HESCOM (DTC No- 25,109,27 & 27)

010 - Supplying and Fixing of.mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.Using 25mm dia G.I.Pipe CSR 2023-24 Page No. 56 of 105 Item No. 13.1.1

011 - Rabbit ACSR Conductor with 1.5% Sag with material cost, labour cost as per HESCOM (DTC No- 25,109, 27 & 27 )

012 - Spiral Earth Electrode with material cost, labour cost as per HESCOM (DTC No- 25,109, 27 & 27 )

013 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP CSR 2023-24 Page No. 17 of 105 Item No. 5.18.4

014 - Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. CSR 2023-24 Page No. 56 of 105 Item No. 13.6

015 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 22/25 A PWD Ele SR 2023-24 Page no. 16 of 105 Item No.5.14.1

016 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting PWD Ele SR 2-23-24 21 of 105 Item No. 5.47

017 - 11kV 45kN Polymeric disc Insulators with material cost, labour cost as per HESCOM (DTC No- 25 & 27 )

018 - 11kV Horizontal cross arm with H.T. Single top support, clamp, bolts,nuts and washers GI pin with material cost, labour cost as per HESCOM (DTC No- 25 & 27 )

019 - Supplying, fixing and wiring electronic 5 to 20 Amps single phase class-1 Accuracy with Temper Proof Energy Meter. PWD Ele SR 2023-24 Page No.19 of 105 Item No.5.30

020 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire grater IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40W PWD Ele SR 2023-24 Page No.46 of 105 Item No.11.8.2

021 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof,dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 300 mm x 214 mm CSR 2023-24 Page No.21 of 105 Item No.5.44.1