Directorate Of Municipal Administration Tender

004 - Supplying and installing of 32mm dia x 1200mm long foundation bolts made out of high tensile steel along with 2 nos nut and bolt washers, etc., (Approved Kalaburagi Mahanagara Palike rate)

005 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300mmx600mmx170mm As per PWD Ele SR 2-23-24 Page No. 16 I.No. 5.44.3 1)For Zenda Circle High Mast

006 - Supplying & fixing of Porcelain fuse channel with cut outon existing wooden/panel using necessary nuts, bolts and washers. 32Amps As per PWD Ele SR 2-23-24 Page No. 14 I.No.5.7.2 1)For Zenda Circle High Mast

007 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD Electrical SR 2022-23 Page No. 16 I.No. 5.47 1)For Zenda Circle High Mast

008 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 5C x 4 mm2 PWD Electrical SR 2-2023-24 Page No. 6 I.No.2.5.17 1)For Zenda Circle High Mast

009 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 Amps TPN PWD Electrical SR 2022-23 Page No. 13 I.No.5.17.8 1)For Zenda Circle High Mast"

010 - Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 2 5 A m p s PWD Electrical SR 2022-23 Page No. 11 I.No.5.13.1 1)For Zenda Circle High Mast

011 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia PWD Electrical SR 2019-20 Page No. 40 I.No 6.1 1)For Zenda Circle High Mast"

012 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 As per ESCOMs SR 2023-24 Item No:32.05 Sl No:201 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

013 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) a) In soil (Hard) PWD Electrical SR 2019-20 Page No. 41 I.No 6.6.1

014 - Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct. a) 6 sqmm to 16 sqmm PWD Electrical SR 2019-20 Page No. 41 I.No 6.5.1

015 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : (RDWSR 2021-22 (SOR CODE-K010A SL.No-1.1) HDPE Grade PE80-PN6.0, 63mm dia

016 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen MaintenanceWarranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. (P No- 37 I No 11.9.3, 11.9.4 PWD Ele SR 2022-23) LED Floodlight 150W

017 - wiring for lighting/power circuit using one of PVC insulated 1100v grade standed aluminium unsheathed wire single core/ multi core cable in open or concealated system of wiring. As Per Pwd SR 2019-20 Page No 7 Item No:2.7.1 4 sqmm Aluminium wire