Directorate Of Municipal Administration Tender

20.44.1 - Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm (CSR vol-2 OF 2023-24, Pg-202, I-20.44.1) ---- As per the directions of the Engineer-in-charge of the work

14.1.1 - Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (CSR vol-2 OF 2023-24, Pg-131 I-14.1.1) ---- As per the directions of the Engineer-in-charge of the work

11.5.1 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (CSR vol-2 OF 2023-24, Pg-77, I-11.5.1) ---- As per the directions of the Engineer-in-charge of the work

20.77 - Removal of old broken glass panes ( any thickness of size, quality or description ) from metal frames, glazed with putty or fixed with bead including cost of labour, complete as per specifications. (CSR vol-2 OF 2023-24, Pg-205, I-20.77) ---- As per the directions of the Engineer-in-charge of the work

20.81 - Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost of materials, (excluding cost of tiles ) labour, complete as per specifications. (CSR vol-2 OF 2023-24, Pg-205, I-20.81) ---- As per the directions of the Engineer-in-charge of the work

20.84 - Cutting out cracks of roof terrace to V - section cleaning out and filling solidly with a hot mixure of bitumen and clean dry sand 1:1 by weight including cost of materials, labour, complete as per specifications (CSR vol-2 OF 2023-24, Pg-205, I-20.84) ---- As per the directions of the Engineer-in-charge of the work

20.109 - Repairs to existing aluminium partition including glass,board, lock, handle, beading etc cost of all material,labour, complete as per specifications. (CSR vol-2 OF 2023-24, Pg-207, I-20.109) ---- As per the directions of the Engineer-in-charge of the work

15.10 - Polyurethane based Single Component for Existing Surface, Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (CSR vol-2 OF 2023-24, Pg-149, I-15.10) ---- As per the directions of the Engineer-in-charge of the work

15.26 - Providing waterproof treatment to Expansion joints using 2 coats of acrylic co-polymer elastomeric sealer and protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc. The surface shall be applied with base coat of healer sealer crystallization liquid and then Acrylic co-polymer elastomeric sealer & protector, wetting agent and liquid (1:1:1:6) over the prepared surface. In addition to port fixing & injection grouting using acrylic polymer & waterproofing slurry, polyester fibrewool will be laid upon membrane by using epoxy Adhesive having Compressive Strength @ 7 days, 45N/mm2 as per BS 6319 Part 2. Over this 1 layer of TPO membrane will be laid as reinforcing material. One primer coat of Acrylic co-polymer elastomeric sealer & protector and a second coat of Acrylic co-polymer elastomeric sealer & protector liquid will be given over the primer coat - conforming to DIN EN 1928-B. The work shall be carried out as per the directions of the Engineer in charge (CSR vol-2 OF 2023-24, Pg-156, I-15.26) ---- As per the directions of the Engineer-in-charge of the work

20.50 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications. (CSR vol-2 OF 2023-24, Pg-203, I-20.50) ---- As per the directions of the Engineer-in-charge of the work

18.25 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CSR vol-2 OF 2023-24, Pg-45, I-8.25) ---- As per the directions of the Engineer-in-charge of the work

8.39 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CSR vol-2 OF 2023-24, Pg-48, I-8.39) ---- As per the directions of the Engineer-in-charge of the work

10.16 - Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to achieve final desired compaction & setting of paver to its final level , including cost of materials, labour and usage charges of machinery complete as per specifications. (The cost of new paver/stones required shall be added separately) (CSR vol-3 OF 2023-24, Pg-95, I-10.16) ---- As per the directions of the Engineer-in-charge of the work

9.21.2 - Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mmthickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm.(I No:9.21.2 PG No:62 BLD SR 2023-24) ---- As per the directions of the Engineer-in-charge of the work