Directorate Of Municipal Administration Tender

code04 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) (CSR Water Supply & Sewerage Works Vol-5, P No-108, I No- 9.17.28, 9.17.38, 9.17.40, 9.17.41 & 9.17.45)75 MM ELECTRO FUSION COUPLER

code05 - 75x63 MM ELECTRO FUSION REDUCER

code06 - 3 inch M.S flange

code07 - 90 MN HDPE LNC

code08 - 75 MM COMPRESSION MTA

code09 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with inimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For Suilce Valve of PN -10.0 and 100mm (CSR Water Supply & Sewerage Works Vol-5, P No-22, I No-2.23.3)

code10 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (CSR PWD Vol-1, P No-7, I No-1.9)

code11 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m KPWD 2023-24 common SR PageNo. 5 Item No.1.4.1 Volume no I

code12 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. KPWD 2023-24 common SR Page No. 15 Item No.2.1.2 Volume no I

code13 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) KPWD SR Vol-02, 2023-24, Item no.5.2, Page No.9

code14 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) KPWD SR Vol-02, 2023-24, Item no.5.4, Page No.9

code15 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge KPWD SR Vol-02, 2023-24, Item no.8.19.1, Page No.44

code16 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications, M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates KPWD SR, Vol.1, 2023-24, Item no. 2.4.3, Page No.16

code17 - Providing and constructing Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per spe. KPWD Vol-02 SR 2023-24, Item no. 6.34, Page No.17

code18 - RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm etc. complete, CSR for Water Supply & Sewerage Works, Volume-5, P No-116, I No-10.6

code19 - Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in , CSR for Water Supply & Sewerage Works, Volume-5, P No-116, I No-10.7

code20 - Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in , CSR for Water Supply & Sewerage Works, Volume-5, P No-116, I No-10.7

code21 - Providing and fixing brass bib cock of approved quality, KPWD SR, Vol.2, 2023-24, Item no. 13.2.1, Page No.115

code22 - Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore, KPWD SR, Vol.2, 2023-24, Item no. 13.6.3.1, Page No.118

code23 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing). PVC pipes 25mm dia, 10 kg/sqcm & class 5 (CSR Water Supply & Sewerage Works Vol-5, P No-113, I No-10.1)

code24 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Medium Duty GI pipe of 40mm dia (CSR Water Supply & Sewerage Works Vol-5, P No-113, I No-10.1)

code25 - Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 40 mm dia GI collar: (CSR Water Supply & Sewerage Works Vol-5, P No-129, I No-11.6.5)

code26 - Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 40 mm dia GI elbow: (CSR Water Supply & Sewerage Works Vol-5, P No-129, I No- 11.7.5)