Directorate Of Municipal Administration Tender

code04 - Wet Mix Macadam (Plant mix method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMCinmechanicalmixplantcarriage of mixed Material by tipper to site, laying in uniform layers with paver/graderinsub-base/base course onwell prepared surface and compacting with vibratory roller to achievethe desireddensity. PWD Common DSR 2023-24 Volume 3(P No: 26 I.No: 4.17)

code05 - Pre cast Cement Concrete Interlocking Blocks Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRCSP63:2018& IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30 mm thick compacted bed of coarse sand,filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)PWD Common DSR 2023-24 Volume 3(P No: 51 I.No: 6.81)

code06 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregatesPWD Common DSR 2023-24 Volume 1 (P No: 15 I.No:2.1.4 )

code07 - Cross Walker Providing Supplying fixing installation commissioning and run of cross walker.etal-All tubular street of 2.5mm thickness are galvanized and zinc dipped, jionts are roboticweided.all weided all weided joints are scalloped as necessary and weilded to an approved MIG process All weieds are dressed of removing all sharpedges and burns.zink primer paint is applied at all the weided points prior to finishing.All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 mitraons.All metal parts are to be testedin salt spraymachine that uses a 5 Percantage NaCl solition in accordance to iso 7227 to handle corrosion for 3000 Hrs.Rubber high quality grip ruber is used forthe handless.Bearings Maintance free ball berings. scope of delivery 1 completely pre-assembled equipment model, Mantainance Maintain according to EN 1663 and as per maintaince guide, safety; All products must betested and certified to meet EN 16630 safety standards with GS test mark the EN 16630 certificates must be issued by a reputed notified internationals certifying agency such as IPEMA, TUV, CPSC or SGS only. the GS mark EN 16630 certificates must be in the mame of tendering party. all product must clearly display the GS mark EN 16630 certificates must be in the name of tenderring partyand not any 3rd party. All product must clearly disply the GS markk as issued in the EN 16630 safety certificates .size LaWxH 2015 x 615 x 1360mm(min)Weight93 KG (min)safety Area 5015 x 3015 mm (min), Capacity 2 person . the work includes all other incidental work required to complete the work in all respects for smoothfunction of the quipement at all respects for its intendedd use the work required in fixing the equipment on site as per the site condition. Tth cost includes cost of transportation , cost of labour HDM of machinery ect. requiredto complete the work. As per the direction of Engineer-in-charge (Open Gym Items Rate adopted as per Quotation Approval by superintending engineer HDMC Hubli)

code08 - Leg & Thigh Excercise/Air Walker Providing Supplying fixing installation commissioning and run of cross walker.metal-All tubular street of 2.5mm thickness are galvanized and zinc dipped,jionts are roboticweided.all weided all weided joints are scalloped as necessary and weilded to an approved MIG process All weieds are dressed of removing all sharpedges and burns.zink primer paint is applied at all the weided points prior to finishing.All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 mitraons.All metal parts are to be testedin salt spraymachine that uses a 5% NaCl solition in accordance to iso 7227 to handle corrosion for 3000 Hrs.Rubber high quality grip ruber is used forthe handless.BearingsMaintance free ball berings. scope of delivery 1 completely pre-assembled equipment model,MantainanceMaintain according to EN 1663 and as per maintaince guide,safety;All products must betested and certified to meet EN 16630 safety standards with GS test mark the EN 16630 certificates must be issued by a reputed notified internationals certifyingagency such as IPEMA,TUV,CPSC or SGS only.the GS mark EN 16630 certificates must be in the mame of tendering party.all product must clearly display the GS mark EN 16630 certificates must be in the name of tenderring partyand not any 3rd party.All product must clearly disply the GS markk as issued in the EN 16630 safety certificates .size LaWxH 1065 x 615 x 1364mm(min)Weight51 KG (min)safety Area 4090 x 3555 mm (min), Capacity 2 person . the work includes all other incidental work required to complete the work in all respects for smoothfunction of the quipement at all respects for its intendedd use the work required in fixing the equipment on site as per the site condition. The cost includes cost of transportation , cost of labour HDM of machinery ect. requiredto complete the work. As per the direction of Engineer-in-charge Open Gym Items Rate adopted as per Quotation Approval by superintending engineer HDMC Hubli )

code09 - Push and Pull Up Chair :Providing Supplying fixing installation commissioning and run of cross walker.metal-All tubular street of 2.5mm thickness are galvanized and zinc dipped,jionts are roboticweided.all weided all weided joints are scalloped as necessary and weilded to an approved MIG process All weieds are dressed of removing all sharpedges and burns.zink primer paint is applied at all the weided points prior to finishing.All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 mitraons.All metal parts are to be testedin salt spraymachine that uses a 5% NaCl solition in accordance to iso 7227 to handle corrosion for 3000 Hrs.Rubber high quality grip ruber is used forthe handless.BearingsMaintance free ball berings. scope of delivery 1 completely pre-assembled equipment model, Mantainance:Maintain according to EN 1663 and as per maintaince guide,safety;All products must betested and certified to meet EN 16630 safety standards with GS test mark the EN 16630 certificates must be issued by a reputed notified internationals certifyingagency such as IPEMA,TUV,CPSC or SGS only.the GS mark EN 16630 certificates must be in the mame of tendering party.all product must clearly display the GS mark EN 16630 certificates must be in the name of tenderring partyand not any 3rd party.All product must clearly disply the GS markk as issued in the EN 16630 safety certificates .size LaWxH: 2570 x 805 x 2685 mm(min) Weight:85.40 KG (min)safety Area: 6287 x 4848 mm (min), Capacity 2 person . the work includes all other incidental work required to complete the work in all respects for smoothfunction of the quipement at all respects for its intendedd use the work required in fixing the equipment on site as per the site condition. Tth cost includes cost of transportation , cost of labour HDM of machinery ect. requiredto complete the work. As per the direction of Engineer-in-charge Open Gym Items Rate adopted as per Quotation Approval by superintending engineer HDMC Hubli )

code10 - Seated Chest Press:Providing Supplying fixing installation commissioning and trial run of Seated chest press.metal-All tubular street of 2.5mm thickness are galvanized and zinc dipped,jionts are roboticweided.all weided all weided joints are scalloped as necessary and weilded to an approved MIG process All weieds are dressed of removing all sharpedges and burns.zink primer paint is applied at all the weided points prior to finishing.All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 mitraons.All metal parts are to be testedin salt spraymachine that uses a 5% NaCl solition in accordance to iso 7227 to handle corrosion for 3000 Hrs.Rubber high quality grip ruber is used forthe handless.BearingsMaintance free ball berings. scope of delivery 1 completely pre-assembled equipment model,Mantainance:Maintain according to EN 1663 and as per maintaince guide,safety;All products must betested and certified to meet EN 16630 safety standards with GS test mark the EN 16630 certificates must be issued by a reputed notified internationals certifyingagency such as IPEMA,TUV,CPSC or SGS only.the GS mark EN 16630 certificates must be in the mame of tendering party.all product must clearly display the GS mark EN 16630 certificates must be in the name of tenderring partyand not any 3rd party.All product must clearly disply the GS markk as issued in the EN 16630 safety certificates .size LaWxH: 1955 x 733 x 2058 mm(min)Weight:86.60 KG (min)safety Area: 5545 x 4470 mm (min), Capacity 2 person . the work includes all other incidental work required to complete the work in all respects for smoothfunction of the quipement at all respects for its intendedd use the work required in fixing the equipment on site as per the site condition. Tth cost includes cost of transportation , cost of labour HDM of machinery ect. requiredto complete the work. As per the direction of Engineer-in-charge Open Gym Items Rate adopted as per Quotation Approval by superintending engineer HDMC Hubli )

code11 - Waist Twister Triple: Providing Supplying fixing installation commissioning and Trial run of waist Twister.metal-All tubular street of 2.5mm thickness are galvanized and zinc dipped,jionts are roboticweided.all weided all weided joints are scalloped as necessary and weilded to an approved MIG process All weieds are dressed of removing all sharpedges and burns.zink primer paint is applied at all the weided points prior to finishing.All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 mitraons.All metal parts are to be testedin salt spraymachine that uses a 5% NaCl solition in accordance to iso 7227 to handle corrosion for 3000 Hrs.Rubber high quality grip ruber is used forthe handless.BearingsMaintance free ball berings. scope of delivery 1 completely pre-assembled equipment model,Mantainance:Maintain according to EN 1663 and as per maintaince guide,safety;All products must betested and certified to meet EN 16630 safety standards with GS test mark the EN 16630 certificates must be issued by a reputed notified internationals certifyingagency such as IPEMA,TUV,CPSC or SGS only.the GS mark EN 16630 certificates must be in the mame of tendering party.all product must clearly display the GS mark EN 16630 certificates must be in the name of tenderring partyand not any 3rd party.All product must clearly disply the GS markk as issued in the EN 16630 safety certificates .size LaWxH: 1460 x 1310 x 1150 mm(min)Weight:39.10 KG (min)safety Area: 4360 x 4510 mm (min), Capacity 2 person . the work includes all other incidental work required to complete the work in all respects for smoothfunction of the quipement at all respects for its intendedd use the work required in fixing the equipment on site as per the site condition. Tth cost includes cost of transportation , cost of labour HDM of machinery ect. requiredto complete the work. As per the direction of Engineer-in-charge Open Gym Items Rate adopted as per Quotation Approval by superintending engineer HDMC Hubli )

code12 - Single Pole Setup Cycle :Providing Supplying fixing installation commissioning and trialrun of Single Pole Setup Cycle.metal-All tubular street of 2.5mm thickness are galvanized and zinc dipped,jionts are roboticweided.all weided all weided joints are scalloped as necessary and weilded to an approved MIG process All weieds are dressed of removing all sharpedges and burns.zink primer paint is applied at all the weided points prior to finishing.All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 mitraons.All metal parts are to be testedin salt spraymachine that uses a 5% NaCl solition in accordance to iso 7227 to handle corrosion for 3000 Hrs.Rubber high quality grip ruber is used forthe handless.BearingsMaintance free ball berings. scope of delivery 1 completely pre-assembled equipment model,Mantainance:Maintain according to EN 1663 and as per maintaince guide,safety;All products must betested and certified to meet EN 16630 safety standards with GS test mark the EN 16630 certificates must be issued by a reputed notified internationals certifyingagency such as IPEMA,TUV,CPSC or SGS only.the GS mark EN 16630 certificates must be in the mame of tendering party.all product must clearly display the GS mark EN 16630 certificates must be in the name of tenderring partyand not any 3rd party.All product must clearly disply the GS markk as issued in the EN 16630 safety certificates .size LaWxH: 1000 x 498 x 1250 mm(min)Weight:51.50 KG (min)safety Area: 3400 x 3498 mm (min), Capacity 2 person . the work includes all other incidental work required to complete the work in all respects for smoothfunction of the quipement at all respects for its intendedd use the work required in fixing the equipment on site as per the site condition. Tth cost includes cost of transportation , cost of labour HDM of machinery ect. requiredto complete the work. As per the direction of Engineer-in-charge Open Gym Items Rate adopted as per Quotation Approval by superintending engineer HDMC Hubli )