Directorate Of Municipal Administration Tender

004 - Providing and laying in position Cement Concrete for all Foundation works. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR 2023-24 Vol-1 P-15 2.2.1)

005 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD CSR 2023-24 Vol-1 P-7 1.9)

006 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work(PWD CSR 2023-2 Vol-3 P-17 3.1(301))

007 - Fabrication, Supplying, Erection, Testing and Commissioning of 20 m Long - Top 150 mm and Bottom 460 mm dia long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have anual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data. ( Bescom SR 2021-22 part-1 P-8, 4.5.3)

008 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with LED Floodlight 240W SystemPower consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI any Government certified agency & Design Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nich

009 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. ENERGY DEPARTMENT CSR FOR KPTCL, (ESCOMs PWD Electrical 2023 - 2024 Volume 6 P-56, I no 13.5)

010 - 1.1 KV, XLPE or heat resistant PVC insulated PVC exutrted Inner Seath Armoured 16Sqmm, 4 Core, (11 GI Strips -4 *0.8mm) LTUG Cable as Per IS-1554 (part-1) or IS-7098 part-1, Armouring Strips thickness and resistivity as per IS-3975(ESCOMs & PWD Electrical 2023 - 2024 Volume 6 P-13, I no 201(32.05)

011 - Straight through jointing Kit Suitable for 1.1 KV Class 16 Sqmm 4 Core LTUG Cable as per IS13573 Epoxy type (ESCOMs PWD Electrical 2023 - 2024 Volume 6 P14, I no 232(34.04)

012 - Epoxy Terminating Kit (pothead0 Suiteable For 1.1 KV, LTUG Cable up to 4C x 50 SSqmm (ESCOMs PWD Electrical 2023 - 2024 Volume 6 P15,I no 249(35.01)

013 - PVC pipe 40mm Dia as per IS-2509 ( PWD CSR 2023-24 P-125 Volume 3 I no 13.50.5

014 - 1.1 KV Class HR (Heat Resistant) PVC Insulated and Sheated Aluminium Single Core lead wires as per IS-694: 2010, PVC Wire -6Sqmm Weight per 100 mtr Coil 3.5 Kg (ESCOMs & PWD Electrical 2023 - 2024 Volume 6 P-21, I no 373(48.03)

015 - Supplying & fixing of 100Amps Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers(ESCOMs & PWD Electrical 2023 - 2024 Volume 6 P-14, I no 5.7.4)

016 - Grounding material (Pipe Grounding): GI Grounding pipe, B- Class, 42mm Dia, 2.5 mtr long, 3.2mm thick with bolt, nut, GI, Strips and Washer Complete minimum Weight of GI pipe: 7.3 Kg (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-22, I no389(51.01)

017 - Grounding material (pipe Grounding): Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 kg each (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-22, I no390(51.02)

018 - Grounding material (pipe Grounding) : Good Quality salt for Grounding purpposes packed in 50 kg Gunny bag (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-22, I no391(51.03)

019 - Digging of Pit for providing GI Pipe type Earthing Hard latterite Soil (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-43, I no 23 (1.6.3)

020 - Wiring for lighting/Power Circuit using one of FRLS PVC insulated 1.1 KV Grade Multistrand Copper with low Conductor resistance 4 Sqmm Single core wire in open are Concealed System of wiring with Specied IS-694-1990 and Confirm into GTP of Group A (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-62, I no 89 (14.03)

021 - 16 Sqmm Aluminium End Terminal (LUG) (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-27, I no 470 (60.02)

022 - 45 Sqmm Brass Cable Gland (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-28, I no 510 (63.04)

023 - UG Cable work : Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. (ESCOMs PWD Electrical 2023 2024 Volume 6, P-63, I no 29.03)

024 - Supplying & fixing miniature circuit breaker son existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10 K nd complete wiring as required confirming to IEC 0898. (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-17, I no 5.18.6)

025 - Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-20, I no 5.42.3)

026 - Supplying and fixing 75x75x6mm angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and npainted with 2 coats of red oxide and then two coats of approved paint. (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-20, I no 5.42.3)

027 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (ESCOMs & PWD Electrical 2023 - 2024 Volume 6, P-21, I no 5.48)