Directorate Of Municipal Administration Tender

004 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm (P154/Ino: 13.24.1)

005 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50mm (P154/Ino: 13.25.1)

006 - Providing, lowering and jointing 50mm dia 25 gauge HDPE pipes of specified grade and conveying to work site including loading and unloading at both destinations and rolling and lowering into Borewell, inclusive of required specials and SS fittings wherever necessary etc. 1st Addendum/2O24-25 COMMON SCHEDULE OF RATES 2023.24 VOLUME-V(P.No. 03, It.No. 13.90 of CSR 2023-24 Volume 5)

007 - Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets (P155/Ino: 13.29)

008 - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work (P156/Ino: 13.34)

009 - Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specifications with testing of as per instructions of engineer incharge of work 3.5X16 sqmm (P156/Ino: 13.35.5)

010 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit.The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia (P157/Ino: 13.39)

011 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 16 Sqmm (P5/Ino:2.3.7) Common SR 2023-24 (Electrical)

012 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter (06 to 15 hp)(P154/Ino: 13.24.3)

013 - Supplying and fixing of porcelain fuse channel with cut out 16 Amps on existing wooden/panel using necessary nuts, bolts, and washers etc complee 100 Amps (P14/Ino:5.7.4) Common SR 2023-24 (Electrical)

014 - Supplying and fixing 100 A 25 kA Three Pole Moulded case circuit Breaker (MCCB) over the existing wood/ Panel board using necessary screws,bolts, nuts, necessary phase separators handle and wiring complete protection of overload and short circuit in thermal magnetic Release micro processor release shall have earth fault as per IS-13947 (Icu=100% lcs) in 4P MCCB all poles should have protection for short-circuit/over load. for microprocessor MCCBs facility for segregating priority and non-priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and interval power circuits to avoid any accidental contact with live current carrying path with the front cover open) Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism-4Pole 125 A 25 kA (P17/Ino:5.15.9) Common SR 2023-24 (Electrical)

015 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm (P20/Ino:5.41.1) Common SR 2023-24 (Electrical)

016 - Fabricating supplying and mounting MS box made out 14SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete (P20/Ino: 5.42.1) Common SR 2023-24 (Electrical)

017 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc, and fixing on existing wood or metal box using NF screws (P9/Ino:3.9) Common SR 2023-24 (Electrical)

018 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) (14 GI Strips - 4 x 0.8 mm) (P13/Ino:32.07) Common SR 2023-24 (Electrical)

019 - Laying of cable in Existing Trench/GI pipe/Stone Ware /RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - 2.5 to 25 Sqmm (P52/Ino:21.05) Common SR 2023-24 (Electrical)

020 - Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately (P.No. 12, It.No. 2.19 of CSR 2023-24 Volume 3)

021 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete.For Medium Duty GI pipe Medium Duty GI pipe of 50mm dia (P.No. 127, It.No.11.2.6 of CSR 2023-24 Volume 5)

022 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Wet Mix Macadam (Plant mix method) (P.No. 26, It.No. 4.17 of CSR 2023-24 Volume 3)

023 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) (P.No. 71, It.No. 25.2 B073B of CSR 2021-22 Volume 3) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (P.No. 15, It.No. 2.1.4 of CSR 2023-24 Volume 1)