Directorate Of Municipal Administration Tender

004 - Adding 5 Percentage Additional on finished rate of concrete per m3 for Formwork, Centering & Scaffolding.(As per CSR VOL-I,Appendix I,Sl.No:-2,Pg No:-115)

005 - Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. (PWD Common DSR, 2023-24, VOL-II,Item No. 2.11, Pg. No. 99).

006 - Construction of Embankment by excavating the available approvedGravel/Murrum deposited at a place or borrow pits during or priorexcavation with all lifts and lead, transportation to site, spreading,grading to required slope and compacting to meet the requirementcomplete as per specifications, including cost of labour,rolling,water,allmaterials,usage& all other appurtenaces required to complete the work Cost per m .PWD SR 2023-24 Volume1 Chapter 1 Page No.7 SL.No.1.8

007 - Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityMoRT&H Spec. 406 A. .PWD SR 2023-24 Volume 3 Page.No.26 Chapter 4 Sl. No 4.27

008 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work PWD Common DSR 2023-24 Volume -III Item NO. 16.27 P. NO. 148.