Directorate Of Municipal Administration Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 46,600Document Cost
Refer DocumentsTender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2023-24/WS/WORK_INDENT15994/CALL-3Tender No
DMA/2023-24/WS/WORK_INDENT15994/CALL-3Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - 11 kV, Jointing & Cable Termination Kit as per IS-13573. Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable. -do- 3x95 Sqmm
4
4270
17081.4
... More
code05 - 11 kV, Jointing & Cable Termination Kit as per IS-13573. Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule. -do- 3x240 Sqmm
2
9359
18719.4
... More
code06 - Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427. 3 Way RMU, 2 OD + 1 VL (One Incomer + One Breaker + One Outgoing)
1
577027
577027.5
... More
code07 - Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014. -do- 63 kVA, Aluminum Wdg, Star 2 (5 Star)
1
195478
195478.5
... More
code08 - Measuring Equipment. LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering).
1
3565
3565.8
... More
code09 - For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories required. (EXCLUDING ETV METER).With CT Ratio 100/5 for 50/63 kVA DTC
1
6607
6607.65
... More
code10 - LT Distribution Box as per IS-13947 Part-1&2. LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)(Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018)
1
23820
23820.3
... More
code11 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) (54 GI Wires - 2.5 mm Dia)
0.24
391876
94050.24
... More
code12 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573. -do- 95 Sqmm,
2
1107
2215.5
... More
code13 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable. -do- 3.5 x 70/95/120 Sqmm
6
401
2406.6
... More
code14 - GSM modem with connecting cable for remote communicating capabilities.
1
15135
15135.75
... More
code15 - GI Pipe - 150 mm Dia
12
1360
16329.6
... More
code16 - RCC Hume Pipes 2000mm long 150mm dia
120
322
38682
... More
code17 - Collars for RCC Hume Pipe 150 mm Dia.
125
86
10762.5
... More
code18 - Caution/Danger Board.
20
157
3150
... More
code19 - Route & Joint indicating slab with MS Anchor rod
6
157
945
... More
code20 - Load Break Switch with Panel.
1
76898
76898.85
... More
code21 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panelboard using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Shortcircuit with adjustable thermal magnetic release, Micro processor release shall have Earth Fault as perIS/IEC60947-2. (Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. -do- FOUR Pole 250 A 25 kA.
2
22460
44921.1
... More
code22 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panelboard using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Shortcircuit with adjustable thermal magnetic release, Micro processor release shall have Earth Fault as perIS/IEC60947-2. (Icu=100%lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/OverLoad. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. -do- FOUR Pole 100 A 25 kA
1
8911
8911.35
... More
code23 - Supplying and fixing of Shunt trip suitable for MCCB.CBCT.
1
1788
1788.15
... More
code24 - Supplying fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ' C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898. -do- 50-63 A TPN
6
3242
19454.4
... More
code25 - Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane(PUR )gasket, with suitable earthing system, on wall/ woodboard/ flushmounting using required clA, bolts, nuts, etc.,with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Double door with necessary bus bar completely wired to use on 440V 3phase 4wire powder coated paintingetc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. -do- 8 Way
1
13235
13235.25
... More
code26 - Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834. 3phase, 400/440V grade, for power factor improvement of rotating machineries like induction motor
20
504
10080
... More
code27 - Supplying, fixing and wiring Automatic PowerFactor controller circuit unit fully, static units controlled by 14stage micro processor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and voltage, to connect/disconnect banks, with automatic recognition or withstand ard programs.
1
22722
22722
... More
code28 - Supplying 250 A 4 x 30 x 10 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., completel
4
3606
14427
... More
code29 - Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S.Flat......with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 100 x 50 x 6 mm C channel
10
793
7938
... More
code30 - Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
200000
-
104000
... More
code31 - Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities
3
949
2847.66
... More
code32 - COPPER CONTROL CABLE : 2C x 2.5 Sq mm
50
98
4935
... More
code33 - COPPER CONTROL CABLE : 2C x 6 Sq mm
50
161
8085
... More
code34 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board
2
9717
19435.5
... More
code35 - Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. -do- 32-40A 4 pole.
1
5404
5404.35
... More
code36 - Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board
3
474
1423.8
... More
code37 - Supplying, fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter.
3
550
1650.6
... More
code38 - Supplying, fixing and wiring rotary selectors with suitable for Ammeter.
3
210
630
... More
code39 - Supplying, fixing and wiring rotary selectors witch suitable forVoltmeter
3
168
504
... More
code40 - Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound
6
590
3540.6
... More
code41 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C
12
540
6489
... More
code42 - Supplying of multi function digital meter with three line backlight CD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3phase ,4wire LT network with IP54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.
1
9780
9780.75
... More
code43 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should been closed in chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layer so salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts
8
4468
35750.4
... More
code44 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
1
5085
5085.15
... More
code45 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. -do- 32 A
1
4294
4294.5
... More
code46 - Earth work excavation for cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m
123.36
508
62691.552
... More
code47 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. -do- HT Cable 3x95 to 150 Sqmm
0.02
61322
1226.44
... More
code48 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. -do- HT Cable 3x185 to 240 Sqmm
0.03
67360
2020.8195
... More
code49 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. -do- LT Cable 35 to 95 Sqmm.
0.24
32695
7847.028
... More
code50 - Laying the GI Pipe 80mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.
12
97
1171.8
... More
code51 - Laying and Jointing the pipes (100-150 mm), dia including lowering in Position: Fixing Collars etc., Joining with mud mortor complete. -do- RCC Pipe
240
72
17388
... More
code52 - Making and Fixing pot head for HT Cable only. Heat shrinkable Type Terminations. -do- 3x95 to 3x150 Sqmm.
4
2790
11163.6
... More
code53 - Making and Fixing pot head for HT Cable only.Heat shrinkable Type Terminations.. -do- 3x185 to 3x240 Sqmm
2
2790
5581.8
... More
code54 - Making and Fixing pot head for LT Cable only. Heat shrinkable Straight Through Joint. -do- 35 to 95 Sqmm Sqmm Sqmm.
2
298
596.4
... More
code55 - Making and Fixing pot head for LT Cable only. Heat shrinkable Type Terminationst. -do- 35 to 95 Sqmm Sqmm Sqmm.
6
199
1197
... More
code56 - Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc., complete. -do- 1 Panel.
3
5084
15252.3
... More
code57 - Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc
3
1009
3027.15
... More
code58 - Erection of Transformer & Structures. Erection of 25 to 63 kVA Transformer on Transformer Structure.
1
1252
1252.65
... More
code59 - Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC. -do- 25/63 kVA TC.
1
2043
2043.3
... More
code60 - Fixing and Wiring of Single/3 Phase Meter on the existing meter board.
1
161
161.7
... More
code61 - Fixing of GPRS Modems with Accessories
1
1413
1413.3
... More
code62 - Wiring of 2 Circuits of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc).
1
1594
1594.95
... More
code63 - Distribution Box for DTC. Fixing LT Distribution box for 100/250/500 kVA DTC (Excluding wiring)
1
404
404.25
... More
code64 - Fixing Danger Board.
20
84
1680
... More
code65 - Fixing of Route Joint Indicating Slab.
6
121
730.8
... More
code66 - Digging of Pit for providing Earthing. -do- Hard Soil.
8
3139
25116
... More
code67 - Laying of control cables from equipment to control panels
100
15
1575
... More
code68 - Supplying & Laying cable trays including welding, fixing of supports.
6
791
4750.2
... More
code69 - Warning Tape
300
7
2205
... More
code70 - Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. For Transformer Platform.
939.58
111
104575.254
... More
code71 - Erection of Pre Fabricated Steel Structure Including the following a. Evacavation 1.5 Mtr and above in width in Hard Soil (0.74 Cmt) b. Filling available excavated earth in side foundation (2.6 Cmt) c. Lifting of Excess Earth up to distance of 10 KMs d. Providing & Laying in poisition plain CC 1:4:8 (0.27 Cmt) e. Providing & Laying in position concrete with M30 Grade (0.83 Cmt) f. Providing TMT Steel FE 550 reinforcement for RCC work (70 Kgs) g. Providing & removing centering, Shuttering, Strutting (2.6 Cmt) h. Handling Charges (fixing of structure to foundation & erection of structure i. Transportation of debries using mini lorry/Tempo j. Specialized tools & tackles and skilled labour for fabrication the structure using CNC bending as per set radious)
1
37987
37987.95
... More
code72 - Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint.
63
1036
65290.05
... More
code73 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
4.94
6601
32610.669
... More
code74 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour
complete as per specifications.
108.8
168
18278.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements