Directorate Of Municipal Administration Tender

code04 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings (PWD Vol-1 SR 2023-24, Item No. 2.11a, Page No. 18)

code05 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (PWD Vol-1 SR 2023-24, Item No. 1.10, Page No. 7)

code06 - Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hotdip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data.12 m/12.5 m - Top 100 mm and Bottom 310 mm dia(2023-24 Vol.6 Ele SR P.NO.13 Itm No.4.5.1)

code07 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Floodlight 200W(2023-24 Vol.6 Ele SR P.NO.46 Itm No.11.9.6)

code08 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (PWD Electrical Vol.6 2023-24 SR P.NO.56 I.No.13.5)

code09 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. C)63 Amps (2023-24 Vol.6 PWD ELE SR Page No:14 ,I no :5.7.3)

code10 - Supplying and Fixing and wiring earth electrode for grounding conduits I.C. cutouts and other equipments on the meter board using 40mm dia 2.9mm thick GI pipe 2.5 mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from pipe to the conduit etc, is to be established through IG wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes oif 12mm dia (2023-24 Vol 6 PWD ELE SR Page No:54 ,I no :12.56)

code11 - Supplying and running GI/copper conductor for grounding Connections,Using Necessary Fixing materials as Required 25 x3 mm Copper Strip (2023-24 Vol 6 PWD ELE SR Page No:55 ,I no :12.58.7)

code12 - Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 (2023-24 VOl 6 PWD ELE SR Page No:13 ,I no :32.3)4 core 10 Sqmm.

code13 - Labour charge Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm (2023-24 Vol 6 PWD ELE SR Page No:41 ,I no :6.5.1)

code14 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete (As per Civil SP KSRB-1-2,P-7) ( 2019-20 PWD ELE SR Page.No:41, Ino 6.6 ) In Soil Ordinary

code15 - KSRB13-9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure of outside iameter raising mains & exposed distribution pipes with special flange, pression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No. KBS 13.2.15.2/13.9 (PWD SR 2018-19 P.No.96 Itm No.13.71) -do-32 mmdia

code16 - Supplyin Fixingf and wiring 3 Phase Digatal Ammetrt Voltmeter( 2023-24 Vol 6 PWD ELE SR Page.No:19 , Ino.5.29 )

code17 - Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. ( 2019-20 PWD ELE SR Page.No:42, , Ino 6.10 ) B)35 Sqmm

code18 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clapms with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with aprroved colour enameled metal paint etc., complete (2023-24 Vol 6PWD ELE SR Page.No:20 Ino 5.42.1 A)14SWG

code19 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.(2023-24 Vol-6 PWD ELE SR Page.No:21, , Ino 5.48)

code20 - Supplying and fixing And wiring Eart Leatage Miniature Circuit breaker (ELMAB.,) 240.450V up to 300me Sensitivity on existing wood/panel Board. (2019-20 PWD ELE SR Page.No:28, , Ino 5.20 )32-40Amps 4 pole

code21 - Supplying and fixing Regular MCB distribution Boards on wall/aood Board/flush mounting using require clamps bolts nuts with provision forfixing suitable type capacity MCB SINGLE PHAse/ 3 phase /single door with powder coated painting Made out of 14 SWG MS enclouse. . (2023-24 Vol 4 PWD ELE SR Page.No:18, , Ino 5.19.2 ) 6 Way SP & N

code22 - Supplying and fixing angle iron frame work fabricated out of .S angle iron and M.S flat with Bolt washer etc and painted with 2 Coat of red oxide and then two coats of approved Paint.(2021-22 PWD ELE SR Page.No:15, , Ino 5.41.2 ) 50X50X6mm

code23 - KSRB13-3.1: Providing and fixing in trenches galvanised I mild steel tubes (medium grade) nominal bore with all fittings (earth work in trenches to be measured and paid for separately) including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 13.2.14/13.6 (KUWD SR 2021-22 P.No. 142 Itm No.N005E) -do-40mm dia

code24 - Providing and fixing meter box etc complete.