Directorate Of Municipal Administration Tender

code 04 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates for Deck slab

code 05 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures

code 06 - Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M20 grade for kerb Cast in Situ

code 07 - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)

code 08 - Providing & fixing RCC Pre-cast Cover Slab of size 0.8 m x 0.8 m x 0.2m of M25-Design mix concrete with 12 mm steel @ 120 mm c/c both ways, over Gate valve extension spindle with central opening along with lid for smooth operation with appurtenances., complete with all lead and lifts etc. complete

code 09 - Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as per design weighing not less than 37Kgs, the pedestal shall be fitted with Class 'C' G.I.Pipe 7 Feet height 75 mm outer dia and 7 feet height top piece outer dia of 65 mm fixed by measure of threading /welding/coupling complete. (excluding foundation).

code 10 - Supplying and laying double walled corrugated(DWC) HDPE pipe including all necessary connecting sockets/couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suitable for drawing under ground cables. 110mm OD/94mm ID (PWD SR 2023-24 Vol - 5 Page No. 95 item No. 9.1.4 )

code 11 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 16 sqmm 4 core (11 GI Strips 4 x 0.8 mm) (ESCOM SR 2023-24 Page No. 13 Item Sl.No. 201 Item No. 32.05)

code 12 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 25 sqmm 3.5 core (12 GI Strips 4 x 0.8 mm) (ESCOM SR 2023-24 Page No. 13 Item Sl.No. 201 Item No. 32.05)

code 13 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff a) 3x95 to 150 Sqmm (ESCOM SR 2023-24 Page No. 13 Item Sl.No. 201 Item No. 32.05)

code 14 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth.In Ordinary/Soft rock upto 300 mm depth (PWD Comm SR 2023-24 Vol - I Page No.8 Item No. 1.12)

code 15 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete For Medium Duty GI pipe a) Medium Duty GI pipe of 40mm dia (PWD Comm SR 2023-24 Vol - V Page No.127 Item No. 11.2.5)

code 16 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete For Medium Duty GI pipe b) Medium Duty GI pipe of 65 mm dia (PWD Comm SR 2023-24 Vol - V Page No.127 Item No. 11.2.7)

code 17 - Supplying and fixing of heavy duty Brass Cable Gland suitable for UG cable of 1.1 class a) 25 mm (PWD Comm SR Escom 2023-24 Vol - VI Page No.28 Item No. 63.01 Sl.No. 507)

code 18 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the follwing sizes a) Installation of Pre-Insulated Lug - CPTAU for 16 Sqmm (PWD Comm SR Escom 2023-24 Vol - VI Page No.54 Item No. 24.21 Sl.No. 226)

code 19 - b) Installation of Pre-Insulated Lug - CPTAU for 25 Sqmm (PWD Comm SR Escom 2023-24 Vol - VI Page No.54 Item No. 24.22 Sl.No. 227)

code 20 - GI/Copperstripsforgroundingconnections,usingnecessaryfixingmaterials as required GI/Copper strips 25 x 3 mm GI strip (PWD Comm SR Ele 2023-24 Vol - VI Page No.54 Item No. 12.58.2)

code 21 - Supply and fixing polished wood board made of not less than 15 mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws 20" x 20" x 2.5" (PWD Comm SR Ele 2023-24 Vol - VI Page No.14 Item No. 5.6.6)

code 22 - Supplying and fixing hylum plastic sheet 3 mm thick with necessary nitches for fixing switches, regulators etc.,and fixing on existing wood or metal box using N. F. screws (PWD Comm SR Ele 2023-24 Vol - VI Page No.9 Item No. 3.9)

code 23 - Fabricating supplying and mounting MS box made out....SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paintand finally finished with approved colour etc., complete 14 SWG (PWD Comm SR Ele 2023-24 Vol - VI Page No.20 Item No. 5.42.1)

code 24 - Supplyandfixingof3polepowercontactorwithNO/NCcontactsonexistingwood/panelboardusingnecessarybolts,nuts,washersand wiring etc., complete with AC-3 Rating and as per IS-13947. 60 A (PWD Comm SR Ele 2023-24 Vol - VI Page No.16 Item No. 5.13.3)

code 25 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase4 wire whole current class-1 Accuracy Energy Meter (PWD Comm SR Ele 2023-24 Vol - VI Page No.19 Item No. 5.35) Basic Rate 5705.00 ADD 5% KK 285.25 Total Rate 5990.25 / Each

code 26 - Supplying and fixing Micro processor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)3-120sec setting. (PWD Comm SR Ele 2023-24 Vol - VI Page No.21 Item No. 5.47) Basic Rate 2315.00 ADD 5% KK 115.75 Total Rate 2430.75 / Each

code 27 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898 a. 6-32 A SP (PWD Comm SR Ele 2023-24 Vol - VI Page No.17 Item No. 5.18.1)

code 28 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898 b) 50-63 A DP (PWD Comm SR Ele 2023-24 Vol - VI Page No.17 Item No. 5.18.1)

code 29 - Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board 63 A 4 pole (PWD Comm SR Ele 2023-24 Vol - VI Page No.18 Item No. 5.20.10)

code 30 - Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S.Flat...... With bolts,washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm (PWD Comm SR Ele 2023-24 Vol - VI Page No.20 Item No. 5.41.1)

code 31 - Supplying and drawing Flexible Multi core Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 2C x 2.5 mm2 (PWD Comm SR Ele 2023-24 Vol - VI Page No.6 Item No. 2.5.7)

code 32 - Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCCceiling and RCCwall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32 mm dia 2.5 mm thick (PWD Comm SR Ele 2023-24 Vol - VI Page No.2 Item No.1.1.3)

code 33 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut out sand other equipment' son themeter board using 40 mm dia 2.90 mm thick GIpipe 2.5 m long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150 mm all- round the pipe to complete depth. The connection from the pipe to the conduit etc.,is to be established through GI wire of size as per lSI specification 7.3.3. of IS732 using 12 mm dia bolts, nuts, washer sand check nuts etc., the pipe shall have 16 through holes of 12 mm dia (PWD Comm SR Ele 2023-24 Vol - VI Page No.54 Item No.12.56)

code 34 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 100 A (PWD Comm SR Ele 2023-24 Vol - VI Page No.14 Item No.5.7.4)

code 35 - Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.125 A (PWD Comm SR Ele 2023-24 Vol - VI Page No.15 Item No.5.8.3)

code 36 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD Comm SR Ele 2023-24 Vol - VI Page No.19 Item No.5.38)

code 37 - Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25 mm (PWD Comm SR Ele 2023-24 Vol - VI Page No.3 Item No.1.9.2)

code 38 - Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips (PWD Comm SR Ele 2023-24 Vol - VI Page No.20 Item No.5.40.1)

code 39 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA (PWD Comm SR Ele 2023-24 Vol - VI Page No.17 Item No.5.15.9) Basic Rate 8487.00 ADD 5% KK 424.35 Total Rate 8911.35 /Each

code 40 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source LED Streetlight 90 W (PWD Comm SR Ele 2023-24 Vol - VI Page No 45 Item No.11.8.4)