Directorate Of Municipal Administration Tender

PWD CSR 2023-24, VOL-1, Page -16, Item No 2.3.1 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD SRRB 2023-24, VOL-1, Page -8, Item No 2.11(a) - Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. For Drain works consider 50% of item concrete rate ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD SRRB 2023-24, VOL-1, Page -8, Item No 2.11(a) - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -17, Item No 6.32 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -17, Item No 8.1.2 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -46, Item No 8.33.1 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.