Directorate Of Municipal Administration Tender

PSupplying, installing, testing and commissioning ( SITC ) Cast steel double flanged dual plate Check valve Class 300 conforming to API 594 of approved make of specified diameter and to withstand specified water pressure with all accessoreis true to line and perfect linking with pipes on either side including loading, unloading, lifting and placing in correct position, cleaning ends, inserting gaskets into correct position, jointing pipes and valve to form water tight joints, cost of all jointing materials, machinery, labour etc., complete with all leads and lifts. erd -2018-19pn-121,in-5.72 400 mm diameter check valve with accessories ,rajnhalli ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Supplying, and fixing of DI double flanged wafer type(concentric)/double eccentically disc,butterfly valves confirming to DIN 335/IS 13095 with renewable soft seal on the disc and body seat face of nickle overlay micro finished/integral seat with power or liquid epoxy coting with min thickness of 250 micron applied on both body and disc inside and outside.The valves shall be suplied along with the required no of std make galvanized bolts and nuts.drilling of hole in the valves shall match with pipe flange drilling std.the valves are to be suitable for buried operation with gear box sealed and lubricated for life time operation.In 13,pn 19,kuwsdb sor-2018-19 ,900 mm diameter butter fly valve with accessories, Bathi ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Manufacturing, providing, transporting, rolling, lowering, laying and jointing, testing and commissioning of oERW (Electric Resistance welded)/ SWA (Submerged arc welded) MS pipes (fee 410 grade) confirming to IS 3589-2001 with latest amendments including perfect linking and welding of joints to correct position inlcudng cost and conveyance of pipes and materials woth all lead and lift, cost of all labour and goving satisfactory, hydraulic test as per IS 3589-2001 with latest amendments for test pressure and working pressure both at factory and site etc complete as per detailed specifications with inside CM 1:1.5 lining of minimum 1mm thick upto 610mm OD and Minimum 12mm thick beyond 610m OD and outside minimum 25mm thick coating in CM 1:3 over 50 x 50mm weld mesh including loading and unloading of pipes for the following diameter adn specified thickneses of plates as noted below including bailing of water wherever necessary. (KUWSDB 2018-19 SR I No.47 Pg 27) rajanhalli 610 mm dia 7.9mm thick ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.