Directorate Of Municipal Administration Tender

code04 - Providing & laying 1500 Microns thick 6 m wide HDPE Geo embrane, over the synthetic clay liner having Thickness 1.5mm, Density .94g/cm, Tensile Strength at yield 23 Nmm/ width and at break 42 Nmm/ width, Elongation at Yield 13%, Elongation at Break 700%, Tear Resistance 175 N, Puncture Resistance 490 N, Carbon Black Content 2.5 and Carbon Black dispersion at Satisfactory level. Rajasthan SOR 2022 (Code no 39.46/Pg no 349)

code05 - Geotextile filter: Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching. ( CM SR 2023-24 P.No. 129/Vol-3/ 14.6)

code06 - Filter media - CA, Providing and constructing vertical/inclined graded filter media using clean, hard graded sand and coarse aggregates from approved source satisfying specified filter criteria in layers of specified thickness including cost of all materials, machinery, labour, laying to required slopes, compacting and all other ancillary operations complete as per specifications and approved drawings. 20 mm down graded coarse aggregate layer ( CM SR 2023-24 P.No. 42 /Vol-4/2.35.3) )

code07 - Filter media - FA, Providing and constructing vertical/inclined graded filter media using clean, hard graded sand and coarse aggregates from approved source satisfying specified filter criteria in layers of specified thickness including cost of all materials, machinery, labour, laying to required slopes, compacting and all other ancillary operations complete as per specifications and approved drawings. ( CM SR 2023-24 P.No. 42 /Vol-4/2.35.1) )

code08 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0. ( CM SR 2023-24 P.No. 95 /Vol-5/ 9.1.7) ) HDPE Grade PE80-PN6.0,160mm dia PN 6.0, 160mm dia

code09 - HDPE Grade PE80-PN6.0, 90mm dia - Lateral along shorter length

code10 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ( CM SR 2023-24 P.No. 7 /Vol-1/1.9) ) For Soil Layer on the top of Geotextile

code11 - Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery, labour including preparing surface, spreading sand including tamping, watering for 15 days & all necessary works as directed and complete as per specification. ( CM SR 2023-24 P.No. 130 /Vol-4/1.10) )