Directorate Of Municipal Administration Tender

NO4 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density(P.No:26, I.No:4.17of KPWD Common S.R Vol-3)

NO5 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and platevibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (P.No:148, I.No16.27of KPWD S.R Vol-3)

NO6 - Providing 50 mm Dia HDPE Sleeve pipe with allied accessories at ferrule point of HSC to assist in regulating flow with allen key with appurtenances., complete.(P.No 109, I.No.9.22 C S.R2023-24,VOL5)

NO7 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work15 mm nominal dia Pipes (CSR 2023-24, Item No:-13.50.1, Page No:-125, Vol-2)

NO8 - Providing & fixing electro fusion saddle comply with BS EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting - Blue/Black for water applications, EF tapping saddle is V-Regarding type. Designedto fuse at a fusion voltage of 40 volt AC. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading piller type pressure exerting 1500N (150 kg apprx.) top load on EF saddle. Fusion time is 170 secs and cooling time is 10mins, Exerted pressure shoud be removed after completing the 10mins cooling time. 63x20,75x20,90x20, 110x20, 140x20 etc. completeelectrofusion saddle (CSR 2023-24, Item No:-9.24, Page No:-110, Vol-5)