Directorate Of Municipal Administration Tender

code01 - operation and maintenance of led source cost of men and materials as directed by the engineer incharge here the work incleds supply and replacement of all compoents inclueding drivers, front protection cover, aluminium housing body complete for the flood light as per the specification mentioned below. above said work to be attended by the contractor at his cost only. specification of the LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 100W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. against anymanufacturing defect working under standard electrical conditions as mentioned above should begiven by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. fixed in Mini Himast poles of 10 Meter height rate aproved by city corporation led floodlight 100 w for mini mash

code02 - Operation and Maintenance of 250W Metal Halide (MH) fixtures consist of metal halide lamp confirming to IS 9974 (part 1 and 2), choke of heavy duty inductive polyester filled copper wound ballast suitable for MH lamps made from low loss silicon steel lamination and are wound with polyester based super enamelled copper wire with class F insulation on specially designed glass filled nylon bobbin and Ignitors suitable for MH lamps confirming to IS 9974. For more details of these parts, please refer respected clauses under Technical Bid Form D-4.( fixed in Mini Himast poles of 11Meter height) DMA/TECH/S.L/186/09-10 DATE 20-02-2010250watts metal halid lamp

code03 - Operation and Maintenance of 400W Metal Halide (MH)fixtures consist of metal halide lamp confirming to IS 9974 (part 1 and 2), choke of heavy duty inductive polyester filled copper wound ballast suitable for MH lamps made from low loss silicon steel lamination and are wound with polyester based super enamelled copper wire with class F insulation on specially designed glass filled nylon bobbin and Ignitors suitable for MH lamps confirming to IS 9974. For more details of these parts, please refer respected clauses under Technical Bid Form D-4.(fixed in Highmast poles of 14 Meterheight) DMA/TECH/S.L/186/09-10 DATE 20-02-2010400watts metal halid lamp