Directorate Of Municipal Administration Tender

code04 - Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with all lead and lift complete as per specifications CSR 2021-22, Vol-5 I.no-9 (Code A130A) and Pg No-65

code05 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) -Mix 1 3 6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Vol-1 I.no-2.1.3 and Pg No -15

code06 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) and formwork shall be added on Percentage basis to the finished rate of concrete per meter cube Vol-1 I.no-2.4.2 and Pg No-17

code07 - Form work as per recommendation of technic working groupe rate for formwork shall be added on Percentage basis to the finished rate of concrete per meter cube for Drian form works considered 35% (vol-1-Sl No.2.- Pg.no-111)

code08 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.-All other type of structures Vol-1 I.no-2.11(h) and Pg No-18

code09 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Vol-1 I.no-2.11(h) and Pg No-18

code10 - Shifting of poles,pipe line repair works and other utilities..etc.. for underlying pipes.etc...executed quantity only