Directorate Of Municipal Administration Tender

004 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge. CSR 2023-24 Vol 2 Item no 8.1.1

005 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.CSR 2023-24 Vol 2 Item no 8.28

006 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plastici sers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. CSR 2023-24 Vol 1 Item no 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

007 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification CSR 2023-24 Vol 1 Item no 2.11 Super structure of Bridges

008 - Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. CSR 2023-24 Vol 1 Item no 20.44.1 W.C Pan of size 580x440 mm

009 - Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 and reinforced with 1.70 kg of TMT steel reinforced with 3 No. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 cm c/c in triangle shape per meter length of door frames, including cost of steel and fabrication charges having 4 No. of 304 Grade Stainless Steel hinges plate attachment made of 165 mm x 25 mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws made out of 304 grade stainless steel screws and MS square nuts of size 8 x 8 square and length 10 mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 32 mm, 21 days tank immersed curing including cost of labour, materials, usage charge of machinery complete excluding the cost of door fixtures as per the direction of Engineer. CSR 2023-24 Vol 1 Item no 12.98.1

010 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. CSR 2023-24 Vol 1 Item no 12.53

011 - Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. CSR 2023-24 Vol 1 Item no 9.38

012 - Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete CSR 2023-24 Vol 1 Item no 9.10

013 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. CSR 2023-24 Vol 2 Item no 13.34

014 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For CSR 2023-24 Vol 5 Item no 13.34 PVC pipes 160 mm dia 6 Kg/sqcm