Directorate Of Municipal Administration Tender

004 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. PWD SR 2023-24 V 2.4.2 / P.No.83 footing 1 1.00 1.00 0.45 0.45 ---- contractor should have class I electrical and kpwd registered contract licence

005 - Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. PWD SR 2023-24 Vol-III,I.No.2.11f/ P.No.18 ---- contractor should have class I electrical and kpwd registered contract licence

006 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications PWD SR 2023-24 Vol-I, I.No.1.10 / P.No.7 ---- contractor should have class I electrical and kpwd registered contract licence

007 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materi als, labour, curing complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2023-24 Vol-2, I.No.8.6.1 / P.No.42 ---- contractor should have class I electrical and kpwd registered contract licence

008 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paer smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR 2023-24 Vol-2, I.No.8.3 / P.No.46 ---- contractor should have class I electrical and kpwd registered contract licence

009 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 PWD SR 2023-24 vol-3 pg 43 Item No 6.2 morth specification no 804 ---- contractor should have class I electrical and kpwd registered contract licence

010 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per ---- contractor should have class I electrical and kpwd registered contract licence

011 - crane hire charges for shfting the existing minimast pole as per market rate ---- contractor should have class I electrical and kpwd registered contract licence

012 - Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resistant and capable of withstanding vehicular traffic and earth loads conforming to IS 16205:2017 as per technical specifications.(b) 63mm Outer dia 8.56.1 ---- contractor should have class I electrical and kpwd registered contract licence

013 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (11 KV Material SR Item No 32) 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) Item No32.08 ---- contractor should have class I electrical and kpwd registered contract licence

014 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff ( LT Cable )(11 KV Labour SR Item No 21.05) 2.5 to 25 Sqmm ---- contractor should have class I electrical and kpwd registered contract licence

015 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 16 Sqmm, 4 Core Item No 34.04 ---- contractor should have class I electrical and kpwd registered contract licence

016 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable3.5 x 225/240/300 Sqmm (Item No 35.5) ---- contractor should have class I electrical and kpwd registered contract licence

017 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600 mm x 600 mm x 170 mm ( PWD Electrical SR 5.44.4) ---- contractor should have class I electrical and kpwd registered contract licence

018 - Supplying . A rated 3phase with neutral bus bar using 400 A 4 x 50 x 10 mm Aluminium Strips ( Item No 5.40.3) required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete ---- contractor should have class I electrical and kpwd registered contract licence

019 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 ---- contractor should have class I electrical and kpwd registered contract licence