Directorate Of Municipal Administration Tender

Vol-1 2.2.1 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Vol No 1 SI No 04 - Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Cement Concrete Drain Walls Percentage on finished rate of concrete per m3 35% (PWD SR 2023-24 Vol No.01 P.No.111 SI No.04)

Vol-1 2.11h - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for other works

Vol-2 17.2 - Gravel packing in tube well construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin-charge.

Vol-4 2.35.1 - Providing and constructing vertical /inclined graded filter media using clean, hard graded sand and coarse aggregates from approved source satisfying specified filter criteria in layers of specified hickness including cost of all materials, machinery, labour, laying to required slopes, compacting and all other ancillary operations complete as per specifications and approved drawings.Sand layer.

Vol-2 13.53 - Constructing brick masonry chamber for underground C.I. inspection,chamber and bends with bricks in cement mortar 1:4 (1 cement : 4,coarse sand) C.I. cover with frame (light duty) 455x610 mm internal,dimensions, total weight of cover with frame to be not less than 38,kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab,with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20,mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand,: 10 graded stone aggregate 40 mm nominal size), inside plastering 12,mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished,smooth with a floating coat of neat cement on walls and bed concrete etc.,complete as per standard design: Inside dimensions 455x610 mm and,45 cm deep for single pipe line : With common burnt clay (non modular),bricks of class designation

Vol-2 13.50.10 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal dia Pipes

Vol-2 17.13 - Providing and laying 100mm thick side wall & bottom slab of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding,usage of machinery, curing, lead and lift charges etc, Complete.

Vol-2 17.12 - Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete.

Vol-3 4.17 - Wet Mix Macadam (Plant Mix Method)Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification including premixingthe Material with water at OMC inmechanical mix plant carriageof mixed Material by tipper to site, laying in uniform layers withpaver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density (PWD SR 2023-24Vol. 3 Page no.26 Item no 4.17).

Vol-3 6.8.2 - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) (PWD SR 2023-24 Vol.3 Page no.51 Item no 6.8.2)

Vol-3 8.42.3b - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)- 8.42.3 , 600 x 300 x 150 mm size

Vol-4 WRD: 3.41.2 - Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing and all other ancillary operations complete.300mm thick

Vol-2 11.25.2 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.