Directorate Of Municipal Administration Tender

PWD Common SR 2023-24 Vol.No.05 Item No.9.1.3 Page - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinationsandrolling and lowering into trenches, laying true to line an jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testingandcommissioning. Therate is exclusive of required specials and fittings wherever necessarylike saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. Note: Upto 110mm dia Coil shall be used. (PWD Common SR 2023-24 Vol.No.05 Item No.9.1.3 Page No 95 ) HDPE Grade PE80-PN6.0, 90mm dia

PWD Common SR 2023-24 Item No. 1.10 Page no.07 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (PWD Common SR 2023-24 Item No. 1.10 Page no.07)

PWD Common SR 2023-24 Vol.No.05 Item No.9.1.7 Page - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinationsandrolling and lowering into trenches, laying true to line an jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testingandcommissioning. Therate is exclusive of required specials and fittings wherever necessarylike saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. Note: Upto 110mm dia Coil shall be used. (PWD Common SR 2023-24 Vol.No.05 Item No.9.1.7 Page No 95 ) HDPE Grade PE80-PN6.0, 160mm dia

PWD Common SR 2023-24 Item No2.23.2 Page no.22 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O“ rings). Body and bonut should be coated with Electrostatically appliedEpoxy Powder Coating with minimum coating thickness of 250 micronboth inside and outside. The rate is inclusive of cost of valves, T.P set,galvanized bolts & nuts and rubber insertions etc. but excluding earth work.(Note: TP set should be considered only for DI pipes estimate. For MSpipes estimates, TP sets cost of corresponding dia shall be deducted fromthe SR rates of valves and provision for corresponding dia MS flangesshould be made in the estimate. ) (PWD Common SR 2023-24 Item No2.23.2 Page no.22)

PWD Common SR 2023-24 Item No2.23.2 Page no.22 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O“ rings). Body and bonut should be coated with Electrostatically appliedEpoxy Powder Coating with minimum coating thickness of 250 micronboth inside and outside. The rate is inclusive of cost of valves, T.P set,galvanized bolts & nuts and rubber insertions etc. but excluding earth work.(Note: TP set should be considered only for DI pipes estimate. For MSpipes estimates, TP sets cost of corresponding dia shall be deducted fromthe SR rates of valves and provision for corresponding dia MS flangesshould be made in the estimate. ) (PWD Common SR 2023-24 Item No2.23.2 Page no.22)

PWD Common SR 2023-24 Item No2.23.2 Page no.22 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O“ rings). Body and bonut should be coated with Electrostatically appliedEpoxy Powder Coating with minimum coating thickness of 250 micronboth inside and outside. The rate is inclusive of cost of valves, T.P set,galvanized bolts & nuts and rubber insertions etc. but excluding earth work.(Note: TP set should be considered only for DI pipes estimate. For MSpipes estimates, TP sets cost of corresponding dia shall be deducted fromthe SR rates of valves and provision for corresponding dia MS flangesshould be made in the estimate. ) (PWD Common SR 2023-24 Item No2.23.2 Page no.22)

PWD Common SR 2023-24 Item No 10.1.2 Page no.113 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: (PWD Common SR 2023-24 Item No 10.1.2 Page no.113)

PWD Common SR 2023-24 Item No 10.1.2 Page no.113 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: (PWD Common SR 2023-24 Item No 10.1.2 Page no.113)

PWD Common SR 2023-24 Item No 10.1.2 Page no.113 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: (PWD Common SR 2023-24 Item No 10.1.2 Page no.113)

PWD Common SR 2023-24 Item No 10.5 Page no.116 - Labour charges for attending to repairs to the PVC pipes by earth work excavation cutting the old pipe installation and jointing of new pipes to the existing old pipe to the depth and line, level and perfect linking at joints including encasing the pipes alround to a depth of not less than 15cms with earth available including cost of all labour,hire charge of equipment,refilling the excavated trenches compacting,finishing neatly by giving satisfactory hydraulic test etc.,complete (PWD Common SR 2023-24 Item No 10.5 Page no.116)

144 - Providing and Fixing HDPE Reducer 110/90mm (As per Market rate)

126 - Providing and Fixing HDPE Reducer 200/160mm (As per Market rate)

123 - Providing and Fixing HDPE Fusion Coller 160 mm dia (As per market rate)

152 - Providing and Fixing HDPE Tee 160 mm dia (As per market rate)

158 - Providing and Fixing HDPE Tee 63 mm dia (As per market rate)

128 - Providing and Fixing HDPE Elbow 63 mm dia (As per market rate)