Directorate Of Municipal Administration Tender

code04 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burden upto 20M.fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of cosumables etc,complete including yield testing at final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc., complete) (Pg No 39, It No 12.1) 2023-24 Common SR of water supply & UGD works)

code05 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burden upto 20M.fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of cosumables etc,complete including yield testing at final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc., complete) (Pg No 39, It No 12.1) 2023-24 Common SR of water supply & UGD works)

code06 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burden upto 20M.fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of cosumables etc,complete including yield testing at final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc., complete) (Pg No 39, It No 12.1) 2023-24 Common SR of water supply & UGD works)

code07 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burden upto 20M.fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of cosumables etc,complete including yield testing at final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc., complete) (Pg No 39, It No 12.1) 2023-24 Common SR of water supply & UGD works)

code08 - Supply of ISI mark 175mm nominal bore, plain end steel casing pipe-grade of steel fee 410 of wall thickness 5.4mm thick confirming to IS 4270:2001 and latest amendments, electrical resistance welded steel tube material and confirming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5 - 7 mts. Both ends threaded confirming to IS 554/1985 one end fixed with socket confirming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes. All shall be responsibility free from defects. The tubes shall be reasonably straight end should be with ISI marking, weighing 25.10 kg/mtr. prices include Collar-Medium duty. (Pg No.143, I.No: 12.32) 2023-24 Common SR of water supply & UGD works

code09 - Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments (Pg.No:143, I.No:12.33) 2023-24 Common SR of water supply & UGD works)

code10 - Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The Thickness of plate used for covering one end shall be 3mm (minimum). The dimesnsions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc., complete with all lead and lifts and as directed by the Engineer-in-charge. (Pg.no:143, I.No:12.34)2023-24 Common SR of water supply & UGD works)

code11 - Providing, supplying to work site, submersible pump set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3 phase, SS bowl & Impeller with low volt motor as per specifications, as per necessary ammendments and instructions of engineer incharge of work, For 10.00 HP-90LPM@220m = 20STG Outlet Dia-2.00" (Pg.no:152, I.No: 13.16.7) 2023--24 Common SR of water supply & UGD works)

code12 - Supply and delivery at site 50mm(2") dia heavy duty unplasticized PVC Column pipes with heavy duty collars, rubber profile ring, vibration control profile ring, freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments (Pg.No:155, I.No:13.28) 2023-24 Common SR of water supply & UGD work)

code13 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1 x 3 x 4m² (Pg.no:154 I.no: 13.22.3) 2023-24 Common SR of water supply & UGD works

code14 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments size 50mm (Pg.no:154, I.no:13.25.1) 2023-24Common SR of water supply & UGD works

code15 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(P.No.20, I.No.5.41.1 of PWD Electrical Part III SR 2023-24)

code16 - Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.(P.No.14, I.No.5.6.6 of PWD Electrical Part III SR 2023-24)

code17 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.(P.No.14, I.No.5.7.4 of PWD Electrical Part III SR 2023-24)

code18 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments (P.No.06, I.No.2.3.6 of PWD Electrical Part III SR 2023-24)

code19 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia..(P.No.157, I.No.13.39 of 2023-24 Common SR)

code20 - Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.(P.No.21, I.No.5.46.6 of PWD Electrical Part III SR 2023-24)

code21 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.((P.No.20, I.No.5.41.1 of PWD Electrical Part III SR 2023-24)

code22 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following Strata (P.No.10, I.No.1.17, 2023-24 PWD SR VOL-1)

code23 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 90mm dia., 6 kg/sqcm & class 3 (P.No.113, I.No.10.1.6, Volume -5 KUWS&DB 2023-24 )

code24 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (P.No.7, I.No.1.10, 2023-24 PWD SR VOL-1)

code25 - Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. (Pg.No:130, I.No: 11.8.6 ) 2023-24 Common SR of water supply & UGD works)

code26 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

code01 - Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltameter 1 no with phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No DOL of S/D starter suitable for respective HP 1 No. Electrical Protection like single phase preventor, under voltage over volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL-2) Direct Online Starter S-D-Star Delta Starter 6 to 15HP pumps (Pg.No:155, I.No: 13.24.3 ) 2023-24 Common SR of water supply & UGD works)

code01 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe: (Pg.No:128, I.No: 11.3.6 ) 2023-24 Common SR of water supply & UGD works)

code01 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia, with body bonnet of Ductile Iron (DI) conforming to IS-1865 with the latest amendements and of grade GGG 40/50, shaft of stainless steel, wedget fully rubber lined with EDPM seals of NBR and the valuves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendements only. The stem sealing should be with toroidal sealing rings (minimum 2" o" rings), Body and bonnet should be coated with Electrostatically applied Epoxy powder coating with minimum coating thickness of 250 micron both inside and outside, the rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc., but excluding earth work, For PN-10: (Note: TP set should be considered only for DI pipes estimate, for MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rate of valves and provision for corresponding dia MS flanges should be made in the estimate) etc, complete. For sluice Valve of PN - 10.00 and 80mm (P.No.22, I.No.2.23.2, Volume-5 KUWS&DB 2023-24)

code01 - Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete 14 SWG (P.No.20, I.No.5.42.1 of PWD Electrical Part III SR 2023-24)