Directorate Of Municipal Administration Tender

code04 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: (P:134/I 10.1.4 to 10.1.6 CSR 2023-24Volume 5) PVC Pipe of 6kg./cm2 75 mm dia

code05 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: (P:134/I 10.1.4 to 10.1.6 CSR 2023-24Volume 5) PVC Pipe of 6kg./cm2 63 mm dia

code06 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, ncluding testing for water tightness, with all lead and ommissioning. (contractor will make his own arrangements for procuring water for testing) Medium Duty GI pipe: (P:127/I 2.2.2 CSR 2023-24 Volume 5 )

code07 - Removing the GI pipes, Cleaning, Washing and Using at Spot or Convying from workspot to office/store with all lead and lift including removal of all times such as Collars, elbow, tees, bends, gland, Cocks Cuts and threads with apprtunces pipes of Dia Pipes of dia 32mm to 80mm (P15/Ino 2.1.2 CSR 2023-24 Volume 5)

code08 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (P154/Ino 13.25.1 CSR 2023-24 Volume 5)

code09 - Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required etc. for: 20.88.6: 50 mm nominal bore (P128/Ino 11.4.6 CSR 2023-24 Volume 5)

code10 - Providing and mataining Chemist Supervisor (Sanitary)as per Employment in Urban Local Bodies NO :1064591

code11 - Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow (P129/Ino 11.7.6 CSR 2023-24 Volume 5)

code12 - Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any.For 50 mm dia GI hexagonal nipple (P146/Ino 11.14.6 CSR 2023-24 Volume 5)

code13 - Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. (P129/Ino 11.6.6 CSR 2022-24 Volume 5)

code14 - Supply and delivery at site GM (copper alloy) gate valves onfirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 50 mm dia GM (Copper alloy) Gate valves (P133/Ino 11.15.6CSR 2023-24Volume 5)

code15 - Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 metres Pipes of dia 32mm to 80mm (P15/Ino 2.1.2 CSR 2023-24 Volume 5)

code16 - Supply and delivery at site wrought middle steel (galvanized) GI socket confirming to IS 1239-II, 1991 with latest amendments if any.For 50 mm dia GI socket(P131/Ino 11.10.6 CSR 2023-24 Volume 5)

code17 - Supply and delivery at site wrought middle steel (galvanized) GI socket confirming to IS 1239-II, 1991 with latest amendments if any. For 80 mm dia GI socket(P131/Ino 11.10.8 CSR 2023-24 Volume 5)

code18 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark withlatest amendment (I.No. 10.10.6, Pg no.117, V-5 2023-24 PWD SR) 65 mm dia PVC Tee 65 mm dia

code19 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark withlatest amendment (I.No. 10.10.6, Pg no.117, V-5 2023-24 PWD SR) 75 mm dia PVC Tee 75 mm dia

code20 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark withlatest amendment (I.No. 10.10.6, Pg no.117, V-5 2023-24 PWD SR) 90 mm dia PVC Tee 90 mm dia

code21 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (I.No.10.11.6. Pg no.118, V-5 WS & UGD SR)63 mm dia PVC BEND 63 mm dia

code22 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (I.No.10.11.6. Pg no.118, V-5 WS & UGD SR)75 mm dia PVC BEND 75 mm dia

code23 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (I.No.10.11.6. Pg no.118, V-5 WS & UGD SR)90 mm dia PVC BEND

code24 - Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment. (I.No.10.12.6, Pg no.119, V-5. 2023-24 PWD SR)63mm dia PVC SERVICE SADDLES

code25 - Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment. (I.No.10.12.6, Pg no.119, V-5. 2023-24 PWD SR) 75 mm dia PVC SERVICE SADDLES

code26 - Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment. (I.No.10.12.6, Pg no.119, V-5. 2023-24 PWD SR) 90mm dia PVC SERVICE SADDLES

code27 - 63 mm dia HDPE End Cap with Pipe of 0.2 m lengt (I.No 9.1.2 , Pg no.95 V-5 WS & UGD SR) 63 mm dia HDPE End Cap.

code28 - 64 mm dia HDPE End Cap with Pipe of 0.2 m lengt (I.No 9.1.2 , Pg no.95 V-5 WS & UGD SR) 75 mm dia HDPE End Cap.

code29 - 65 mm dia HDPE End Cap with Pipe of 0.2 m lengt (I.No 9.1.2 , Pg no.95 V-5 WS & UGD SR) 90 mm dia HDPE End Cap.

code30 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10:(I.No.2. 23.2 Pg no.22, V-5 WS & UGD SR) For Suilce Valve of PN -10.0 and 80mm