Directorate Of Municipal Administration Tender

code04 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ( PWD SR Vol-3 Pg. No. 26, It. No.4.17, KPWD, SR 2023-24)

code05 - Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. ( PWD SR Vol-3 Pg. No. 31, It. No.5.1, KPWD, SR 2023-24)

code06 - Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. ( PWD SR Vol-3 Pg. No. 32, It. No.5.6C, KPWD, SR 2023-24)

code07 - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. ( PWD SR Vol-3 Pg. No. 31, It. No.5.3, KPWD, SR 2023-24)

code08 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ( PWD SR Vol-3 Pg. No. 43, It. No.5.31, KPWD, SR 2023-24)

code09 - Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. ( PWD SR Vol-3 Pg. No. 67, It. No.8.15, KPWD, SR 2023-24)

code10 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge.(WMM/WBM Base to be paid separately if necessary as per relevant technical specification) ( PWD SR Vol-3 Pg. No. 51, It. No.6.8.1, KPWD, SR 2023-24)

code11 - Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete. Upto 0.30m depth ( PWD SR Vol-5 Pg. No. 51, It. No.16.28.1, BWSSB, SR 2023-24)

code12 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. ( PWD SR Vol-3 Pg. No. 17, It. No.3.1, KPWD, SR 2023-24)

code13 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinationsand cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:(Pg.No: 113, I.no:10.1.6, VOl-5 Water supply Common SR 2023-24) for 90mm dia, 6kg/sqcm & class 3

code14 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia, with body bonnet of Ductile Iron (DI) conforming to IS-1865 with the latest amendements and of grade GGG 40/50, shaft of stainless steel, wedget fully rubber lined with EDPM seals of NBR and the valuves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendements only. The stem sealing should be with toroidal sealing rings (minimum 2" o" rings), Body and bonnet should be coated with Electrostatically applied Epoxy powder coating with minimum coating thickness of 250 micron both inside and outside, the rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc., but excluding earth work, For PN-10: (Note: TP set should be considered only for DI pipes estimate, for MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rate of valves and provision for corresponding dia MS flanges should be made in the estimate) etc, complete. For sluice Valve of PN - 10.00 and 80mm (P.No.22, I.No.2.23.2, Volume-5 KUWS&DB 2023-24)