Directorate Of Municipal Administration Tender

2.3.1 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (Vol-1 P.No.15)

22-2 - Formwork shall be added on percentage basis to the finished concrete item rate for Drain formwork shall be considerd as 35% PWD DSR 2023-24 Volume-II Page No. A(7) Item No. 22-2

4.5.1 - Fabrication,Supplying,Erection,TestingandCommissioningof. mslong Polygonhig hmast with Single/Multiple telescopic sections having, (minimum over lap distance of 1.5 time sof topsection) thickness as perBSEN10025 grades 355JO/ASTMA57250 steel sheet plate for shaft suitable to with stand a wind velocity of 47m/s as per IS875 part3 (as per GAD rawing).Base plate as perIS2062/ASTMA572-50.The mast shall be Galvanized in single Hot dip as per BSENISO1461/ASTMA123with an average 70 microns as per IS2629,and welded as perBS5135 SingleL-Seamjoint The mast shall have2 Way head frame with diecast LM-6pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides ,stainless steel wire rope of AISI304 grade 7/19-core, (Factor of Safety as perTRno-7).2.5mm2EPRinsulatedPCPsheathedtrailingpowercablehouse inside the bottom shaft of mast with door having locking arrangement Themast shall have manual/power tool (Suitable reversible geared motor operating on230/415V,50Hz,shall be provide above 15Mtrmast)The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS1239.The mast shall be erected on existing RCC footing .The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with to parrow fitted on top of the head frame cover and GLS type aviation twin lA fitting with wiring complete. (excluding foundation)as per technical data.(SR 2023-24 page no12 of 105 vol-6)

4.6.6 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete(DSR Vol-6 page no.13 of105)

11.8.5 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned 120Watts (Common SR 2023-24 page no46 of 105)vol.6

32.07 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (Common SR 2023-24 Vol-6 page 13 of 81)

5.43.1 - Supply and Installation/Fixing/Provision of Pole box with HRC Fuse/MCB provision and suitable connector/ terminal for 3Ph/1Ph connections with Loop-In & Loop-Out terminals for 10mm2 /25mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.(Common SR 2023-24 Vol.6 page 20 of 105)

2.5.9 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990(COMMON SR 2023-24 VOL6 PAGE 6 of 105)4C x 2.5 mm2

5.41.3 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S .Flat. with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(Common SR 2023-24 page 20of 105)

5.48 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers(COMMON SR 2023-24 PAGE 21 OF 105)

5.17.1 - Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. 4 Way Common SR 2023-24 vOL6 Page 17 of 105

13.18.1 - Fixing of .ATPST/ change over switch /Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.(common SR 2023-24 vol-6 page 57 of 105)

5.7.3 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers.63 amps(Common SR 2023-24 page 14 of 105)