Directorate Of Municipal Administration Tender

code04 - Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (For Roof and Water Tanks) KPWD 2023-24, Vol:2, P.No.201, I.No: 20.38

code05 - Making the opening in brick masonry for door/window/clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. KPWD 2023-24, Vol:2, P.No.197, I.No: 20.1

code06 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications. KPWD 2023-24, Vol:2, P.No.203, I.No: 20.50

code07 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. KPWD 2023-24, Vol:2, P.No.50, I.No:8.51

code08 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge KPWD SR 2023-2024,Vol- 2, MORTH/Chapter 8, P.No.48, Sl No:-8.39

code09 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. KPWD SR 2023-2024,Vol- 2, MORTH/Chapter 8, P.No.46, Sl No:-8.30

code10 - Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. KPWD 2023-24, Vol:2, P.No.202, I.No: 20.46

code11 - Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm KPWD 2023-24, Vol:2, P.No.62, I.No: 9.21.2

code12 - Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge KPWD 2023-24, Vol:2, P.No.62, I.No: 9.20.2

code13 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. KPWD 2023-24, Vol:2, P.No.64, I.No: 9.30

code14 - Providing and fixing skirting with teak shade pre-laminated (one side deco rative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete :18 mm thick KPWD 2023-24, Vol:2, P.No.70, I.No:10.13.1

code15 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. KPWD 2023-24, Vol:2, P.No.99, I.No: 12.11

code16 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) KPWD 2023-24, Vol:2, P.No.100, I.No: 12.15

code17 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. KPWD 2023-24, Vol:2, P.No.86, I.No: 11.34A

code18 - Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum Ti O2 Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made) KPWD 2023-24, Vol:2, P.No.110, I.No: 12.90

code19 - Polyurethane based Single Component for New Surface: Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. KPWD 2023-24, Vol:2, P.No.149, I.No:15.1

code20 - Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick KPWD SR 2023-2024,V-6, PART III, Page No.02, Utilization (PWD Electrical) :Item No:1.1.2

code21 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with onecoat of primer of approved make etc. 200 x 90 x 65 mm Metal box KPWD SR 2023-2024,V-6, PART III, Page No.02, Utilization (PWD Electrical) :Item No:1.4.5

code22 - Extra for Groove cutting in brick wall/CC floor to the suitabledepth for concealing of Conduit/GI pipe and plastering,finishing upto wall surface complete.upto 50 mm conduit in brick wall. KPWD SR 2023-2024,V-6, PART III, Page No.03, Utilization (PWD Electrical) :Item No:1.7.1

code23 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 sqmm KPWD SR 2023-2024,V-6, PART III, Page No.05, Utilization (PWD Electrical) :Item No:2.3.2

code24 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 sqmm KPWD SR 2023-2024,V-6, PART III, Page No.05, Utilization (PWD Electrical) :Item No:2.3.3

code25 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module switch plates KPWD SR 2023-2024,V-6, PART III, Page No.08, Utilization (PWD Electrical) :Item No:3.5.5

code26 - Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI 80. Power Input: 220-240V@50/60Hz & Power factor 0.9 along with CE approved. 2 yearsWarranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 36/40 W KPWD SR 2022-23,V-6, PART III, Page No.43, Utilization (PWD Electrical) :Item No:11.3.3

code27 - Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM /W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shallnot exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shallnot be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) KPWD SR 2023-2024,V-6, PART III, Page No.30, Utilization (PWD Electrical) :Item No: 6.4.1

code28 - Fixing a ceiling nwall mounting fan of all capacities and all types, with necessary clamps and S hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality,mounted on a suitable size wooden board and wired. KPWD SR 2023-2024,V-6, PART III, Page No.57, Utilization (PWD Electrical) :Item No:13.11

code29 - Supplying exhaust fan of 1440 RPM of 300 mm (12) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply KPWD SR 2023-2024,V-6, PART III, Page No.30, Utilization (PWD Electrical) :Item No:6.1