Directorate Of Municipal Administration Tender

code04 - Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod(PWD SR 2023-24 VOL:5 P.NO.4 I.NO:1.12)

code05 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.1.5mm2(PWD SR 2023-24 VOL:6 P.NO.5 I.NO:2.3.2)

code06 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.6mm2(PWD SR 2023-24 VOL:6 P.NO.5 I.NO:2.3.5)

code07 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.2.5mm2(PWD SR 2023-24 VOL:6 P.NO.42 I.NO:2.3.3)

code08 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A DP (PWD SR 2023-24 VOL:6 P.NO.42 I.NO:5.18.4)

code09 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN (PWD SR 2023-24 VOL:6 P.NO.17 I.NO:5.18.9)

code10 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32A(PWD SR 2023-24 VOL:6 P.NO.14 I.NO:5.7.2)

code11 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.600 mm x 600 mm x 170 mm(PWD SR 2023-24 VOL:6 P.NO.21 I.NO:5.44.4)

code12 - Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete100 A 4 x 30 x 6 mm Aluminium Strips(PWD SR 2023-24 VOL:6 P.NO.21 I.NO:5.44.4

code13 - Supplying and fixing of solar Lux level street light control switch three phase including suitable capacity contactor. 5 kW (PWD SR 2023-24 VOL:6 P.NO.21 I.NO:5.50.1)

code14 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts(PWD SR 2023-24 VOL:6 P.NO.21 I.NO:12.57)

code15 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp impartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have inhouse facility accredited by NABLCPRI & any Government certified agency & Design & Development facility certified by ISO001:2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree/Nichia Lumileds Osram make LED Source. LED Floodlight 150W (PWD SR 2023-24 VOL:6 P.NO.46 I.NO:11.9.4)

code16 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT5500K, IP66 optical and electrical compartment & impact resistance of complete luminaireIK08. Power Factor0.9 with mains, Surge ProtectionMin 5KV along with Over voltageOverload, short circuitmiss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 LM 80 Adherence with RoHS.UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture withW System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminairemanufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 120 W (PWD SR 2023-24 VOL:6 P.NO.46 I.NO:11.8.5)

code17 - Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.Using 32mm dia G.I.Pipe(PWD SR 2023-24 VOL:6 P.NO.56 I.NO:13.1.2)

code18 - Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires.(PWD SR 2023-24 VOL:6 P.NO.56 I.NO:13.6)

code19 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.3 way (PWD SR 2023-24 VOL:6 P.NO.8 I.NO:3.3.2)

code20 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box(PWD SR 2023-24 VOL:6 P.NO.8I.NO:3.5.2)

code21 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One Way Switch(PWD SR 2023-24 VOL:6 P.NO9 I.NO:3.6.7)

code22 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(PWD SR 2023-24 VOL:6 P.NO.9 I.NO:3.6.10)

code23 - Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.(PWD SR 2023-24 VOL:6 P.NO.9 I.NO:3.7)

code24 - Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.(PWD SR 2023-24 VOL:6 P.NO.18 I.NO:5.20.10)

code25 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 .4C x 6 mm2(PWD SR 2023-24 VOL:6 P.NO.7 I.NO:2.5.23)