Directorate Of Municipal Administration Tender

DMASKP04 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 16 20 mm thick and joints finished with cement mortar 13 over eisting cement concrete bed including cost of materials mortar labour curing complete as per specifications.

DMASKP05 - Removing white or colour wash by scrapping and sand papering and pre paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engineer in charge

DMASKP06 - Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in

DMASKP07 - Applying priming coats with primer of approved brand and manufacture having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 gL as per specifications and as per directions of Engineer in charge.

DMASKP08 - Finishing walls with Acrylic Smooth eterior paint of required shade New work Two coat applied 1.67L10 over and including priming coat of eterior primer applied 2.20 kg 10 with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineerincharge.

DMASKP09 - Providing Salwood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves ecluding cost of cement concrete and side clamps but including cost of materials labour usage charges complete as per specifications.

DMASKP10 - Providing and fiing flush door shutter made out of solid core block board type well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 partI 1991. from manufacturer complete as per spcification. do 35 mm thick both side commercial

DMASKP11 - Providing and fiing factory made Green certified Anti Termite UV resistant high water absorbant single etruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 5860 Suspension Grade calcium carbonate and natural fibers wood powderrice huskwheat husk and non toic additives maimum toicity inde of 12 for 100 g having minimum density of 650 kgm and screw withdrawal strength of 1800 N Face 900 N Edge minimum compressive strength of 50 Nmm modulus of elasticity 850 Nmm and resistance to spread of flame of Class A category with property of being termiteborer proof watermoisture proof and fire retardant and fiing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials transportation labour and fiing charges.Cost of Fitures to be paid separately 30 mm thickness.

DMASKP12 - Providing and fiing aluminium tower bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc. complete

DMASKP13 - Providing and fiing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineerin charge Anodized AC 15 aluminium including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the EngineerinChar

DMASKP14 - Providing and fiing stainless steel Grade 304 railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete ic fiing the railing with necessary accessories stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin charge for payment purpose only weight of stainless steel members shall be considered ecluding fiing accessories such as nuts bolts fasteners etc. including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge.

DMASKP15 - Providing and fiing glazing in aluminium door window ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineerincharge . Cost of aluminium snap beading shall be paid in basic itemWith float glass panes of 5 mm thickness including cost of materials labour usage charges of machinery complete as per specifications.

DMASKP16 - Water Supply Sanitary Work

DMASKP17 - Electrification For Building Chescom Deposits