Directorate Of Municipal Administration Tender

code04 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - For Buildings

code05 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, includingall lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code06 - Providing hearting embankment using selected impervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials,machinery, labour,all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete.

code07 - WRD:6.6Design, fabrication, supply, erection, testing and commissioning of vertical lift sliding type all interchangeable (except bottom element)stoplog gate elements consisting of skin plate, horizontal and vertical girders, stiffeners, lifting pins, bronze padded slide blocks, guide shoes, rubber seals, clamps with all accessories for spillway including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings. Note:1. Total wt of 1 set stoplog elements in t = 0.0553 x ( L2 x H x h )0.716 Where ( L ) is length = Clear distance between piers + 0.65 m. ( H ) is total height of stoplog gate in m = FRL - Sill level + 0.20 m ( h ) is head of water above sill of gate in m = FRL - Sill level 2. Quantity of structural steel = 99.3 % of computed weight of 1 set

code08 - Supplying P-2 Class R.C.C spun pipes ( safe for 4 kg / cm2 test pressure) to work spot including cost of all materials, machinery, labour, taxes, duties, levies, royalty & all necessary works as applicable . 7.20.1 400 mm dia P-2 Class R.C.C spun pipe