Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead lifts cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code05 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures

code06 - providing and constructing load bearing wall with solid concrete blocks of size 400 150 200 mm having block density more than 1800kg /cum and minimum strength of 4.00 N/sqmm conforming to is 2185(part-1)-2005 and constructed with cm 1:4 as per IS 2572:2005 including cost of all materials ,labours ,scaffolding and curing , usage charges of machinaries etc complete as per specifications

code07 - Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

code08 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.

code09 - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. (-2022 volume2 I. No. 8.63 P.No. 51)

code10 - SCRAPPING AND REMOVING TOP SOIL :-Scrapping the area by removing 0.15m soil and removing of unwanted plants,grass along with roots.25km initial transport, including lead, lift loading and unloading charges (1x1x0.15mt)

code11 - 1 ST DIGGING:-Digging of the area for developing lawn including removing weeds, debris if any and breaking of clumps, watering etc. (1x1x0.45mt)

code12 - Supply of inputs such as sand FYM Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required

code13 - Procurement of quality lawn grass Korean Grass Turf

code14 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge

code15 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 4C x 2.5 mm2

code16 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

code17 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63 A DP

code18 - Supplying and mounting 2 Nos. of 2Way 6 A flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as per IS 3854

code19 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 CCT 5500K IP 66 optical and electrical compartment impact resistance of complete luminaire IK08 Power Factor 0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 60Hz application Compliance to IS 10322 IEC 60598 LM 79 LM 80 Adherence with RHS UL approved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools LED Light fixture withW System Power consumption LED Efficiency 1301mw nominal CRI 75 Luminaire manufacturer should have in house facility accredited by NABL CPRI any Government certified agency Design Development facility certified by ISO 9001 2008 Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree Nichia Lumileds/Osram make LED Source. LED Floodlight 100W

code20 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers

code21 - Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter