Directorate Of Municipal Administration Tender

code04 - Operation and Maintenance’ of light sources mentioned below as 1(a) to (c) and cost of men and material as directed by the Engineer in-charge. Here the work includes supply and replacement of all components/materials such as lamps, chokes /ballasts, starters, condensers, ignitors, side holders, wire etc., complete for the street lighting as per the specifications mentioned below, including painting of poles and footings, pole numbering and preparing of master register for each ward/division, removing of buntings, posters, threads, banners from the street lighting poles. Direct, tapping, Bimetal and all other nature of faults etc., to be attended by the contractor at his cost only.Metal Halide (MH) Lamp fixtures consist of metal halide lamp confirming to IS 9974 (part I and II), choke of heavy duty inductive polyester filled copper wound ballast suitable for MH lamps made from low loss silicon steel lamination and are wound with polyester based super enamelled copper wire with class F insulation on specially designed glass filled nylon bobbin and Ignitors suitable for MH lamps confirming to IS 9974. For more details of these parts, please refer respected clauses under Technical Bid Form D-4. 400W

code05 - Operation and maintenance of LED streetlight with pressure die cast aluminum hosing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70percentage CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminar IK08. Power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection Min 4KV along with Over voltage / overload, short circuit / miss wiring protection. Compatable for pole mouting with outer dia of 40mm to 50mm universal voltage driver to operates wide voltage range from 100 V to 270 V 50/60 HZ application over load & short circuit protection ensures reliable operation in spite of problem in output side compliance to IS 103222/IEC 60598, LM 79 LM 80 adherence with RoHS UL approved MCPCB Top access street light with RoHS UL approved MCPCB top access street light with single screw to ensure ease of maintenance at the sight location with minimal tools LED light fixture with ……..w system power consumption LED efficiency 130 lm/w at 1W & fixture efficiency 80lm/w with nominal CRI 75 Luminaire manufacture should have in house facility accredited by NABL/CPRI & any Government certified agency & Design development facility certified by ISO 9001:2008 Housing with supplier word mark / name shall be engraved / embossing on the die cast hosing / Body part warranty of 5 years against any manufacturing defect working under standard electrical conditions suitable for B1/B2 roads as per IS 1944 Part I & Part II. 72/65 Watt

code06 - Operation and maintenance of LED streetlight with pressure die cast aluminum hosing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70% CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminar IK08. Power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection Min 4KV along with Over voltage / overload, short circuit / miss wiring protection. Compatable for pole mouting with outer dia of 40mm to 50mm universal voltage driver to operates wide voltage range from 100 V to 270 V 50/60 HZ application over load & short circuit protection ensures reliable operation in spite of problem in output side compliance to IS 103222/IEC 60598, LM 79 & LM 80 adherence with RoHS UL approved MCPCB Top access street light with RoHS UL approved MCPCB top access street light with single screw to ensure ease of maintenance at the sight location with minimal tools LED light fixture with ……..w system power consumption LED efficiency 130 lm/w at 1W & fixture efficiency 80lm/w with nominal CRI 75 Luminaire manufacture should have in house facility accredited by NABL/CPRI & any Government certified agency & Design development facility certified by ISO 9001:2008 Housing with supplier word mark / name shall be engraved / embossing on the die cast hosing / Body part warranty of 5 years against any manufacturing defect working under standard electrical conditions suitable for B1/B2 roads as per IS 1944 Part I & Part II. 90 Watt

code07 - 120 Watt LED streetlight :- Operation and maintenance of LED streetlight with pressure die cast aluminum hosing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70percentage CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminar IK08. Power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection Min 4KV along with Over voltage / overload, short circuit / miss-wiring protection. Compatable for pole mouting with outer dia of 40mm to 50mm universal voltage driver to operates wide voltage range from 100 V to 270 V 50/60 HZ application over load & short circuit protection ensures reliable operation in spite of problem in output side compliance to IS 103222/IEC 60598, LM 79 & LM 80 adherence with RoHS UL approved MCPCB Top access street light with RoHS UL approved MCPCB top access street light with single screw to ensure ease of maintenance at the sight location with minimal tools LED light fixture with ……..w system power consumption LED efficiency 130 lm/w at 1W & fixture efficiency 80lm/w with nominal CRI 75 Luminaire manufacture should have in house facility accredited by NABL/CPRI & any Government certified agency & Design development facility certified by ISO 9001:2008 Housing with supplier word mark / name shall be engraved / embossing on the die cast hosing / Body part warranty of 5 years against any manufacturing defect working under standard electrical conditions suitable for B1/B2 roads as per IS 1944 Part I & Part II. 120 Watt

code08 - Operation and maintenance of LED streetlight with pressure die cast aluminum hosing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70percentage CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminar IK08. Power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection Min 4KV along with Over voltage / overload, short circuit / miss wiring protection. Compatable for pole mouting with outer dia of 40mm to 50mm universal voltage driver to operates wide voltage range from 100 V to 270 V 50/60 HZ application over load & short circuit protection ensures reliable operation in spite of problem in output side compliance to IS 103222/IEC 60598, LM 79 & LM 80 adherence with RoHS UL approved MCPCB Top access street light with RoHS UL approved MCPCB top access street light with single screw to ensure ease of maintenance at the sight location with minimal tools LED light fixture with ……..w system power consumption LED efficiency 130 lm/w at 1W & fixture efficiency 80lm/w with nominal CRI 75 Luminaire manufacture should have in house facility accredited by NABL/CPRI & any Government certified agency & Design development facility certified by ISO 9001:2008 Housing with supplier word mark / name shall be engraved / embossing on the die cast hosing / Body part warranty of 5 years against any manufacturing defect working under standard electrical conditions suitable for B1/B2 roads as per IS 1944 Part I & Part II. 150 to 180 Watt