Directorate Of Municipal Administration Tender

code04 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates (2023-24 SR V-1, P-15 I-2.1.2)

code05 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates (KPWD SR 2023-24 V-1 P.no: 15, I.no:2.2.1 )

code06 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures (KPWD SR 2023-24 V-1 P.no: 18, I.no:2.11 h )

code07 - Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (2021-22 SR V-2 It no 5.3 P.no 9)

code08 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (2021-22 SR V-2 It no 5.4 P.no 9)

code09 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. (2023-24 SR V-2, P-44 I-8.19.1)

code10 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical Specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (2023-24 KPWD SR It no 2.1.4 P.no 15)

code11 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (2023-24 KPWD SR It no 6.32 P.no 17)

code12 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (2023-24 SR V-2 P-41 I-8.4.1)

code13 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (KPWD SR 2023-24 V-1 P.no: 7, I.no:1.9 )

code14 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (2023-24 SR V-2 P-45 I-8.29)

code15 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (2023-24 SR V-2 P-64 I-9.31)

code16 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (2023-24 SR V-2, P-84 I-11.25.2)

code17 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (2023-24 SR V-2, P-82 I-11.16.2)

code18 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade) (2023-24 SR V-2, P-95 I-11.59)

code19 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (2023-24 SR V-2, P-47 I-8.33.3)

code20 - Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters including cost of materials, labour, curing complete as per specifications. (2023-24 SR V-2 P-26 I-7.37.1)

code21 - Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.(KPWD SR 2023-24 V-3 P.no: 17, I.no:3.7 )

code22 - Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. complete as per clause 401. For Grading -I Material (SR 2023-24 V-3 P NO 23 I NO 4.2 (i))

code23 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (KPWD SR 2022-24 V-2 P.no:63 , I.no:9.25)

code24 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) (KPWD SR 2022-24 V-3 P.no:74 , I.no:8.42.3) 600 x 300 x 150 mm size

code25 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (KPWD SR 2023-24 V-3 P.no: 17, I.no:3.1 )

code26 - Cross Walker RMI-3 Cross Walker Supply and fixing of Cross walker. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 2015 x 615 x 1360 mm. Weight: 93 KG Safety Area 5015 x 3015 mm, Capacity 2 persons.as per Spec & as per Engineer Incharge.

code27 - Leg & Thigh exerciser/Air walker Supply and fixing of Air walker. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must clearly deplay the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 1065 x 615 x 1364 mm. Weight: 51 KG Safety Area : 4090 * 3555 mm, Capacity 1 persons as per Spec & as per Engineer Incharge.

code28 - Waist twister triple RMI-16 Waist Twister Triple Supply and fixing of Waist twister Healyh walker. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must clearly deplay the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 1460 * 1310 * 1150 mm. Weight: 39.1 KG Safety Area : 4360 * 4510 mm, Capacity 2 persons as per Spec & as per Engineer Incharge.

code29 - Single pole setup cycle RMI-17 Single Pole Setup Cycle Supply and fixing of single pole setup cycle. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must clearly deplay the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 1000 * 498 * 1290 mm. Weight: 51.5 KG Safety Area : 3400 * 3498 mm, Capacity 1 persons as per Spec & as per Engineer Incharge.

code30 - Leg press MI-4 Leg Press Supply and fixing of Leg press. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must cplearly deplay the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 2270 * 635 * 1640 mm. Weight: 60.2 KG Safety Area : 5300 * 3685 mm, Capacity 2 persons as per Spec & as per Engineer Incharge.

code31 - Trainer RMI-7 AB Trainer/Sit-up Bench Supply and fixing of Double Sit up Bench. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must clearly deplay the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 1412 * 1366 * 650 mm. Weight: 42.6 KG Safety Area : 4462 * 4078 mm, Capacity 2 persons as per Spec & as per Engineer Incharge

code32 - Push &pull up chair RMI-9 Push and Pull Up Chair Supply and fixing of Pull up chair. Metal: All tubular steel of 2.5MM thickness are glavinized and zinc dipped. Jionts are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all aharp edges and burrs. Zito primar paint is applied at all the welding points prior to dinishing. All metal parts are power coated using AKZO nobel-great wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000Hrs. Rubber: High Quality grip rubber is used for the handles. Bearing: maintanance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintanance: maintain according to EN 16630 and maintanance guide. Safety: All products must be tested as certified to meet EN 16630 safetybstandards with GS test mark. The EN 16630 cirtificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd party. All products must clearly deplay the GS mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 2570 * 805 * 2685 mm. Weight: 85.4 KG Safety Area : 6287 * 4848 mm, Capacity 2 persons as per Spec & as per Engineer Incharge