Directorate Of Municipal Administration Tender

NO4 - Digging of Pits 1.8 mtr depth for errection of 9 to 10 mtr Long Steel/ RCC/PSC supports as per approved Drawing - Ordinary Soil

NO5 - 02 00 004-PSC Pole-8.0M Long 200 kg WL &Erection of PSC poles7.5 to 8 mtr long in a pit of 1.5 mtr depth. - Ordinary Soil

NO6 - Digging of Pits 1.5 mtr depth for errection of 7.5/8 mtr Long Steel/ RCC/PSC supports as per approved Drawing - Ordinary Soil

NO7 - 02 84 108-Robbit ACSR Conductor &Stringing of conductor Rabbit ACSR binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps. - Ordinary Soil

NO8 - 4 Pin Cross Arm with pole clamp, bolt & nuts & washers for PSC Pole - MS& Fixing of 4 Pin cross arm with insulator and Braces fixing. - Ordinary Soil

NO9 - 4 Pin Cross Arm with pole clamp, bolt & nuts & washers for RCC Pole - MS& Fixing of 4 Pin cross arm with insulator and Braces fixing. - Ordinary Soil

NO10 - 2 Pin Cross Arm with pole clamp, bolt & nuts & washers for PSC Pole - MS& Fixing of 2Pin cross arm with insulator and Braces fixing. - Ordinary Soil

NO11 - 02 83 003-1.1K V Ceramic pin Insulator (Shell Only )

NO12 - 02 83 053-1. 1kV GI Pin FOR 1.1k Cermaic shell Insulator

NO13 - 02 83 003-158-No 8 Strain Insulator

NO14 - 02 00 120-Per - Streessed tubuler Spun Pole 11mtr Long - 500Kg WL &Erection of RCC poles 11 mtr long concrete spun pole in a pit of 2.5mtr depth. - Ordinary Soil

NO15 - Digging of Pits 2.5 mtr depth for errection of 11 mtr Long tubular pole as per approved Drawing - Ordinary Soil

NO16 - Special cross arm set with EG strips , braces, clamps bolts nuts & washers complete &labour for special cross arm with cross arm for EG strips , braces, clamps bolts nuts & washers - ordinary soil

NO17 - 02 83 320 - silcon rubber composite disk insulator / 11kv 45 kn polymeric insulator

NO18 - Providing cement concret to poles and Gay sets with material and labur including nessary curing etc . Completed (cost does not including excavation) Base conctreing with CC:1:4:8-Pole base 11/9/8mt support (500x650x150mm) -Rcc Pole -9.0M Long 145kg WL-ordinary soil

NO19 - Providing cement concret to poles and Gay sets with material and labur including nessary curing etc . Completed (cost does not including excavation) Base conctreing with CC:1:4:8-Pole base 11 mtr spun pole (100x1000x150mm) -Per-Stressed Tubler spun 11 Mtr Long200kg WL-ordinary soil

NO20 - Providing cement concret to poles and Gay sets with material and labur including nessary curing etc . Completed (cost does not including excavation) Base conctreing with Cc 1:2:4(As per actuals)-150mm around poles for height of 300mm for PSC Pole - 9.0m Long 200 WL-ordinary soil

NO21 - 03 58 012-Street light metering box made of MS Sheet Steel with clamps

NO22 - 03 58 078 -SMC Street Lighting Metering box with Automatic Control Swith, contactors with Singel Phase 5-30 Amps meter & 50/5Act

NO23 - 06 13 501 -Street light automatic on and off timer set box

NO24 - 100KVA LT Wiring Kit Singel Circuit & Wiring one circuit of LT Wiring Kit for 25/63/100KVA DTC to the exiting LT protection kit / Distrubution Box via metcring box -ordinary soil

NO25 - 03 01 107-lt PROTECTION LIT & Fixing if LT Protection kit -ordinary soil

NO26 - Supply of LED Streetlight luminaire with pressure die cast al housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percentage maximum light intensity should be between 60 to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. P. F. greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage or Overload, short circuit or miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50 or 60Hz application. Compliance to IS 10322 or IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....W System Power consumption. LED Efficiency greater than 1301 m or w , nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing n the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect LED Streetlight 75 W (PWD Ele SR 2023-24, P No-46, I No-11.8.3.)

NO27 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.(PWD Ele SR 2023-24, P No-56, I No-13.5)

NO28 - Supplying and Fixing of........mm dia classA GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket streetlight fitting of all capacities to GIorGIor railor RCpole/wall using suitable clamps,bolts,and nuts and wiring using suitable capacity wires. (PWD Ele SR 2023-24, P No-56, I No-13.1.2.)