Directorate Of Municipal Administration Tender

004 - 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator

005 - No. 8 Strain Insulator

006 - Rabbit ACSR 6/3.35 mm Al + 1/3.35 mm St Std Wt 214 Kg/KM

007 - Stringing of Rabbit ACSR conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps

008 - Guy Clamp - MS

009 - Anchor Rod using 12 mm rounds/Guy Rod - MS

010 - Labour charges for Digging of Pit for Guy Set - Ordinary Soil

011 - Fixing of GUY Set with break insulator making use of 7/3.15 mm 7/10 SWG galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing

012 - Optical Fibre Cable OFC and its Accessories - HDPE/PLB Pipe 40/33 mm

013 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

014 - Laying of LT UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm

015 - Aluminium End Terminal (Lug) - 16 Sqmm

016 - Fabricating, supplying and erecting Swaged tubular Pole of height 10m having three sections and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S.base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5Way connector of size 67x125x82mm for 7.5MPole/200x160x98mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch. The Pole shall be erected in cement concrete work(1:2:4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS 2713-7. - Erection of heavy duty Pole on Footpath/median 10m (5m Hb, 165.1 mm dia 4.85 mm thick x 3m Hm, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 47

017 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm

018 - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete

019 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia

020 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 2C x 1.5 sq.mm

021 - Supplying and fixing telescopic M.S.bracket fabricated by using 0.5m length 4" dia telescopic M.S.pipe with 2" dia 1.5m long M.S.Bracket and are welded with suitable angle using 6mm thick M.S.sheet, grip bolts & nuts as required suitable for 9 to 12ms M.S.tubular pole, with necessary two coats of painting with all other accessories - Single bracket 2 m. Length

022 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m