Directorate Of Municipal Administration Tender

HBHalli 004 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/P.No.16/Vol-1/2.4.2) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

HBHalli 005 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery,labour,cleaning,straightening,cutting,bending,hooking,laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (All other type of structures) CSR-2023-24 Volume - 1.I no 2.11 h P.NO 18

HBHalli 006 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Wet Mix Macadam (Plant Mix Method).(Volume-III (CSR 2023-24, I.No.4.17, P.No.26)

HBHalli 007 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and color of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge..(Volume-III (CSR 2023-24, I.No.9.25, P.No.63)(Volume-III (CSR 2023-24, I.No.4.17, P.No.26)

HBHalli 008 - Supplying and fixing M15 grade precast cement concrete Kerb stones. (600 x 300 x 150 mm ) Volume-III (CSR 2023-24 ,I.NO:8.42.3, P.NO:A-19)

HBHalli 009 - Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation. Volume-III (CSR 2023-24 ,I.NO:8.52, P.NO:78)

HBHalli 010 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer in-charge. (Made of G.I. wire of dia 4 mm)( CM SR 2023-24 P.No.95/Vol-2/11.58 )

HBHalli 011 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR For Buildings. CSR-2023-24 Volume - 2 .I no 11.16.1 P.NO 82

HBHalli 012 - Fabricating, providing and erecting in position of M S Ornamental security Grill Gate without hot dip using 75 x 12mm M S Flat for around frame work with verticals at the centre and horizontal centered support M S Square of 20 x20 mm of different heights as shown in the drawing are to be fixed at 16 cms C/C for square bars of full height and at 8cms C / C for bottom rods provide ornamental C I Designers at the bottom and C I arrows in the middle and top. The entire frame work is to be fixed by means of expansion bolts to the brick pillars with necessary drilling holes. the work includes providing two coats of enamel painting over one coat of red lead ready mix primer coat etc complete cost of all labour, painting, erection charges using hoist pulley cranes with all lead and lift, loading, transporting and unloading using hoist pulley cranes, scaffolding charges and all other incidental charges required for successful completion of the work as per specification and drawings (P. No. 43 / I. No. 7.31 of CSR 2018-19)