Directorate Of Municipal Administration Tender

2.11a v1 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

5.1.1 v2 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

2.2.1 v1 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

6.33 v2 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

9.9 v2 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

9.40 v2 - Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.5.2 v2 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

11.25.2 v2 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

7.1.1 v2 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 7.1.1 0.63 mm thick with zinc coating not less than 275 g/ m² ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.41 v2 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.33.3 v2 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Providing and fixing Sadarahalli Granite benches with back rest supporting piece 2 nos.of size (0.6x1.20x0.05) mtrs sadarahalli granite to cutting to required shape ad sitting slab size (1.55x0.45x0.05) mtrs including grooves, nosing, chamfering, design of cutting, lining metal paste gum, electrification charges and smooth finishing, complete, including cost of materials, labours, transporation charges . ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

3.12 v3 - Construction of rock fill embankment with broken hard rock fragments of size not exceeding 300 mm laid in layers not exceeding 500 mm thick including filling of surface voids with stone spalls, blinding top layer with granular material, rolled with vibratory road roller, all complete as per clause 313. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

8.42.6 v3 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 100 mm size ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

9.25 v2 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing Children Playing Equipments type - Rainbow climber similar to LK-CL-81 having the following specifications of size 12*2*5ft all round rectangular pipes are GI or CR , ISI made of guage 14, painted with two coat red oxide and final paints of industrial paints. GI nut and bolt branded bearing heavy, FRP thickness of 4 to 5mm, swing assembly 6mm chain with rubber coating. The rate shall include cost of materials, transportation, labour, fixing charges and all taxes duties statuatory payment to be deducted in bills. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing Children Playing Equipments type - See Saw Double similar to lk-ss-63 having the following specification of size 8ft*5ft*2ft, all round rectangular pipes are GI or CR , ISI made of guage 14, painted with two coat red oxide and final paints of industrial paints. GI nut and bolt branded bearing heavy, FRP thickness of 4 to 5mm, swing assembly 6mm chain with rubber coating. The rate shall include cost of materials, transportation, labour, fixing charges and all taxes duties statuatory payment to be deducted in bills. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing Children Playing Equipments type - Arch swing 2 seater similar to LK-SW-51 having the following specifications of size 10ft*5ft*9ft all round rectangular pipes are GI or CR , ISI made of guage 14, painted with two coat red oxide and final paints of industrial paints. GI nut and bolt branded bearing heavy, FRP thickness of 4 to 5mm, swing assembly 6mm chain with rubber coating. The rate shall include cost of materials, transportation, labour, fixing charges and all taxes duties statuatory payment to be deducted in bills. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing Children Playing Equipments type - Two way Slide having the following specification of size 15ft*20ft*9ft, all round rectangular pipes are GI or CR , ISI made of guage 14, painted with two coat red oxide and final paints of industrial paints. GI nut and bolt branded bearing heavy, FRP thickness of 4 to 5mm, swing assembly 6mm chain with rubber coating. The rate shall include cost of materials, transportation, labour, fixing charges and all taxes duties statuatory payment to be deducted in bills. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing Children Playing Equipments type - standing merry goround Children Playing equipment having the following specification, of size dia 4ft height 4ft, all round rectangular pipes are GI or CR , ISI made of guage 14, painted with two coat red oxide and final paints of industrial paints. GI nut and bolt branded bearing heavy, FRP thickness of 4 to 5mm, swing assembly 6mm chain with rubber coating. The rate shall include cost of materials, transportation, labour, fixing charges and all taxes duties statuatory payment to be deducted in bills. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing Children Playing Equipments type - deck merry goround Children Playing equipment having the following spwcification, of size dia 5ft height 4ft, all round rectangular pipes are GI or CR , ISI made of guage 14, painted with two coat red oxide and final paints of industrial paints. GI nut and bolt branded bearing heavy, FRP thickness of 4 to 5mm, swing assembly 6mm chain with rubber coating. The rate shall include cost of materials, transportation, labour, fixing charges and all taxes duties statuatory payment to be deducted in bills. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment - seated chest press made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery : 1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 1955*733*2058 mm(min), weight 86.6kgs(min), safety area 5545*4470 mm(min), capacity 2 person. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment - AB trainer / sit up bench made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery : 1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 1412*1366*650 mm(min), weight 42.6kgs(min), safety area 4462*4078mm(min), capacity 2 person. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

approved rate - Supplying & Fixing open gym equipment - waist twister triple made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as necessary and welded to a approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO noble - grade wall powder to the thickness of 80 to 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NACL solution in accordance to ISO 7227 to handle corrosion for 3000 hours. High quality grip rubber is used for the handles, maintainance free ball bearings scope of delivery : 1 completely free assembled equipment model. Maintain according to EN 16630 and as per the maintanance guide. All product must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international ceritifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 cerificates mut be in the name of tendering party and not any 3rd party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size 1460*1310*1150 mm(min), weight 39.1kgs(min), safety area 4360*4510 mm(min), capacity 3 person. ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

13.31.3 v2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 13.31.1 15 mm nominal dia Pipes m 182.00 13.31.2 20 mm nominal dia Pipes m 242.00 13.31.3 25 mm nominal dia Pipes ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK