Directorate Of Municipal Administration Tender

code04 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Mechanical Means (Vol 1 Page no. 8 Item no. 1.12)

code05 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (Vol 1 Page no. 15 Item no. 2.1.4)

code06 - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Vol 3 item no. 4.17 Page no. 26)

code07 - Precast Cement Concrete Interlocking Blocks Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (Vol 3 Item no. 6.8.1 Page no. 51)

code08 - Precast Cement Concrete Interlocking Blocks Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 20MSA upto 50MSA & for Arterial streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.(WMM/WBM Base , DLC to be paid separately as per relevant technical specification) (Vol 3 Item no. 6.8.4 Page no. 52)

code09 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol 1 Item no. 2.3.2 Page no. 16)

code10 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (Vol 1 Item no. 1.11 Page no. 7)

code11 - Kerb Stones Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size (Vol 3 Item no. 8.42.3 Page no. 74)

code12 - Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. (Vol 3 Page no. 67 Item no. 8.15)

code13 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (Vol 3 Page no. 74 Item no. 8.43)

code14 - Painting on concrete surface Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. (Vol 3 Page no. 123 Item no. 13.14)

code15 - Supply of LED Street light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of antiglare clear diffuser with Injection mould edpolycarbonate material, delivering superior light out put Rated life Burning Hrs50000hr@Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70degrees. CCT5500K, IP66 optical and electrical compartmen & impact resistance of complete luminaire IK08. Power Factor0.9 with mains, Surge Protection-Min 5KV along with Overvoltage/Overload,shortcircuit/miss-wiring protection.Compatible for pole mounting with outer dia of 40mmto50mm. Universal Voltage driver tooperate wide voltage range from100Vto270V50/60 Hz application. Compliance to IS10322/IEC60598,LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with singles crew to ensure ease of maintenance at the sight site location with minimized minimal tools. LEDLightfixturewith........WSystem Power consumption. LEDEfficiency1301m/w, nominal CRI75.Luminaire manufacturer should havein-house facility accreditedby NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark/name shall be Engraved/Embossing on the diecasthousing /Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumi Leds/Osram make LED Source. LED Streetlight 70W ( Vol 6 Page no. 46 Item no. 11.8.3 )

code16 - Fabricating, supplying and erection of...ms long hot dip Galvanized Octagonal hot dip Pole with BSEN10025 grade S355JO steel plate for shaft,IS2062 for base plate with door opening arrangements, including suitable boards, Bakelitesheet and MCBs as per IS specifications suitable to withstand the windspeed of 47m/s for.......m Pole in single section and single joint welded as per IS9595/IS10178AWS having dimensions bottom.....mm,top....mm with 3mm thick, suitable baseplate and 4Nos of.....long Jbolts alongwith template and the Poles hallbe hot dipgalvanized in single dipping with not less than 65micronasper ASTM-A123 and 153etc.,(excluding foundation) as per drawing appended. 7 m - Top 70 mm and Bottom 130 mm dia ( Vol 6 Item no. 4.2.5 Page no. 11)

code17 - Supplying,and fixing of Hotdip Galvanized M.S.Bracket suitable for outdoor luminaries and mountedon Octagonal poleusingn ecessary bolts, nuts etc., complete. Double Arm Bracket with 1000 mm Standard 40/50 mm dia ( Vol 6 Item no.4.6.4 Page no. 13)

code18 - Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) (Vol 6 SR 2023-24 Page no. 13 Item no. 32.02)

code19 - Copper Control Cables : 2 Core 10 Sq mm (Vol 6 Page no.40 Item no. 13.3)

code20 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP (VOL 6 PWD Electrical SoR 2023-24 Page no. 17 Item no. 5.18.5)

code21 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (Vol 3 Item no. 3.1 Page no. 17)

code22 - Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge. (Vol 2 Page no. 189 Item no. 19.19 )

code23 - Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. (Vol 2 Page no. 189 Item no. 19.21 )

code24 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Vol 2 Page no. 82 Item no. 11.16.1)

code25 - Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work. ( Vol 2 Page no. 26 Item no. 7.34)

code26 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needlevibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol 1 Page no. 16 Item no. 2.5 )

code27 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures (Vol 1 Page no. 18 Item no. 2.11 h )

code28 - Grating: Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (Vol 2 Page no. 86 Item no. 11.34A)

code29 - Loading and Unloading of Hume pipe Loading of RCC Hume pipes by mechanical means including a lead upto 30 m 600/450 mm dia Hume pipe (Vol 3 Page no. 143 Item no. 16.5 i c)

code30 - Loading and Unloading of Hume pipe Unloading of RCC Hume pipe by manual means including a lead upto 30 m (Vol 3 Page no. 143 Item no. 16.5 ii b)

code31 - Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 250 mm dia. ( Vol 5 Page no. 188 Item no. 16.3.1)

code32 - Sand - M-Sand ( Vol 3 Item no. 64 Page no. A-40)

code33 - Bollards - (BBMP APPROVED RATE)

code34 - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. 80 cm x 60 cm rectangular ( Vol 3 Item no. 8.6 801 A x Page no. 65 )

code35 - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. 60 cm equilateral triangle ( Vol 3 Item no. 8.6 801 A iv Page no. 64 )

code36 - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. 60 cm x 60 cm square ( Vol 3 Item no. 8.6 801 A xiii Page no. 65 )

code37 - Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Barge board (Upto 300 mm) ( Vol 2 Item no. 7.39.4 Page no. 27 )

code38 - Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Gutter (600 mm over all girth) ( Vol 2 Item no. 7.39.6 Page no. 27 )