Directorate Of Municipal Administration Tender

004 - Spiral Earth Electrode (Item no 2.16, Page no 4)

005 - Labour charges for Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) (Item no 2.08, Page no 44)

006 - Aluminium End Terminal (Lug) - 10 Sqmm (Item no 60.01, Page no 27)

007 - Supplying and erection of 7.5 mtrs long decorative pole with decorative double bracket and dome light enclosure made over cast iron and cast aluminium MS pipe shall be used for providing the internal support as per IS1998-1161. Pole shall also be provided with integral JB arrangement which includes bakelite sheet, MCB and suitable size connector.(without cables) technical specifications of 7.5 Mtrs long decorative cast iron pole with decorative double bracket material: cast iron material used for embellishments of Grade FG-150. MS Pipes used shall be ISI marked & of B class. As per the IS 1998:1161. PRE TREATMENT: each and every cast piece is shot blasting to remove all its external dirtanddresi dues etc. Painting ans FINISHING: CI & GI units are given an extensive treatment with pu based each primer and paint prescribed for such surfaces to make it absolutely rust and corrossion proof as well as giving it a pleasing appearance throug antique finish. Minimum DFT level is 60 Microns. MRF Metal coat pu painted is used. Strenght: Structurally designed to sustain desired wind load at location extra strenght is provided through reinforcement of pipe. Mounting arrangement: Pole unit should be gr out edushing 4nos. anchor J bolts of size M-24x750mm long confirming to EN8Gr. Dimensions of the unit:Total height =7500mm. Service window: A suitable service window shall be provided in the base of the pole to allow access to electrical connections.-With all lead and lift and as per the directions of engineer in charge of work (MCC approved quotation rates)

008 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 40x40x6mm(Item no 5.41.1)

009 - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (Item no 5.42.2)

010 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia(Item no 12.56)

011 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 - 3C x 1.5 sq.mm(Item no 2.5.2)

012 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 6-32 A TPN. (Item no 5.18.7)

013 - Earth work excavation for Foundation by mechanical means for all works anddepth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work -In all kinds of soils Depth upto 3 m

014 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates

015 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labor, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

016 - Formwork, Centering & Scaffolding for Pole Open Foundation @4%

017 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - All other type of structures (Item no 2.11.h)